Scanning to computer via USB connection

Last Updated : 16-Dec-2011
Issue Number : 8100137100

Solution

Follow this procedure to scan a document to your computer. Make sure that the scanner driver is installed. To check if the driver is installed, see Installing the Software using USB connection.

1. Set Documents

Place the first page on the platen glass if you are not using the ADF.

For documents you can scan, see Document Requirements.

2. Enter the Scan Mode

Press [SCAN].

The SCAN indicator lights up and the machine enters scan standby mode.

3. Set Scan Function

Start MF Toolbox, then select the scan format.

The mark will be displayed above the button you select.

4. Start Scanning

Press [Start].

NOTE

If you want to cancel scanning, Press [Stop/Reset] on the operation panel, then click [OK] on the computer screen.