Solution
SNMP helps monitor the state of the machine and collects information on it. The default setting is <ON>.
The following two items can be set:
Sets the SNMP community name. You can specify up to two community names. The default setting is <public> for COMMUNITY NAME 1.
Enables the computers on the network to access the machine and modify its settings if this item is activated. You can specify this setting for each community separately. The default setting is <ON> for SNMP WRITABLE 1 and <OFF> for SNMP WRITABLE 2.
1. Press [Additional Functions].
2. Press [<-] or [+>] to select <SYSTEM SETTINGS>, then press [OK].
If the System Password has been set, enter the System Password using the numeric keys, then press [OK].
3. Press [<-] or [+>] to select <NETWORK SETTINGS>, then press [OK].
4. Press [<-] or [+>] to select <SNMP SETTINGS>, then press [OK].
5. Press [<-] or [+>] to select <USE SNMP>, then press [OK].
6. Press [<-] or [+>] to select <ON> or <OFF>, then press [OK].
- <ON>: When you set or browse each item of the machine with utility that uses SNMP to obtain information.
- <OFF>: When you do not use an SNMP utility.
NOTE
If you want to use a Canon printer driver or utility, select <ON> for <USE SNMP>.
7. Press [<-] or [+>] to select <SNMP SETTINGS>, then press [OK].
8. Press [<-] or [+>] to select <COMMUNITY NAME 1>, then press [OK].
9. Use the numeric keys to enter the desired community name other than "public," then press [OK].
10. Press [<-] or [+>] to select <SNMP SETTINGS>, then press [OK].
11. If you need to specify <COMMUNITY NAME 2>, press [<-] or [+>] to select <COMMUNITY NAME 2>, then press [OK].
If you do need not to specify <COMMUNITY NAME 2>, skip to step 14.
12. Use the numeric keys to enter the desired community name, then press [OK].
13. Press [<-] or [+>] to select <SNMP SETTINGS>, then press [OK].
14. Press [<-] or [+>] to select <SNMP WRITABLE 1>, then press [OK].
15. Press [<-] or [+>] to select <ON>, then press [OK].
16. If you need to specify <SNMP WRITABLE 2>, press [<-] or [+>] to select <SNMP SETTINGS>, then press [OK].
If you do not need to specify <SNMP WRITABLE 2>, skip to step 19.
17. Press [<-] or [+>] to select <SNMP WRITABLE 2>, then press [OK].
18. Press [<-] or [+>] to select <ON>, then press [OK].
19. Press [Stop/Reset] to return to the standby mode.