Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused. Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused.

Contact Us

Manual IP Address Setting

Last Updated : 16-Dec-2011
Issue Number : 8100133400

Solution

If the IP address is not assigned automatically, or you want to specify the IP address manually, follow the below procedure.

1. Press [Additional Functions].

2. Press [<-] or [+>] to select <SYSTEM SETTINGS>, then press [OK].

3. Press [<-] or [+>] to select <NETWORK SETTINGS>, then press [OK].

4. Press [<-] or [+>] to select <TCP/IP SETTINGS>, then press [OK].

5. Press [<-] or [+>] to select <IP ADDRESS AUTO.>, then press [OK].

6. Press [<-] or [+>] to select <OFF>, then press [OK].

7. Press [<-] or [+>] to select <IP ADDRESS>, then press [OK].

8. Use the numeric keys to enter the IP address, then press [OK].

9. Press [<-] or [+>] to select <SUBNET MASK>, then press [OK].

10. Use the numeric keys to enter the subnet mask, then press [OK].

11. Press [<-] or [+>] to select <GATEWAY ADDRESS>, then press [OK].

12. Use the numeric keys to enter the gateway address number, then press [OK].

13. Turn off the main power on the left side of the machine, then turn on the power to restart the machine.