18-Apr-2018
0400381802
I have read and understood the disclaimer below
and wish to download the designated software
Firmware Version 1.0.5.0 incorporates the following fix.
1. Fixes a phenomenon in which the start time code is not correctly displayed when MP4 clips captured at 59.94P/50.00P frame rate are imported into NLE software.
*This applies to cameras equipped with Firmware Version 1.0.3.x - 1.0.4.x. MXF clips are not affected.
Caution:
Firmware Version 1.0.5.0 is for XF205/XF200 camcorders with Firmware Version 1.0.0.x - 1.0.4.x. If your camcorder's firmware is already Version 1.0.5.x, it is not necessary to update the firmware. Once the camcorder is updated to the latest version, it cannot be restored to a previous version.
Preparations for the Firmware Update:
After the Firmware update has been performed, the camcorder's menu and custom picture settings will be reset. It is recommended that users save their menu and custom picture settings as settings data to an SD card, separate from the one that will be used to carry out the update, before starting update operations. This saved data can be loaded into the camcorder and the settings can be changed after the update has been completed. For further information on this, please refer to the section in the unit's Instruction Manual titled "Saving and Loading Camera Settings".
The downloaded folder contains the firmware (file name: VKC6.FIM / file size: 44,358,992 bytes), and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese). Before starting the firmware update operations, please be sure to carefully confirm your understanding of these instructions.
The following items are required to perform this firmware update:
1. An XF205 or XF200 camcorder body
2. A computer (OS: Windows 10, Windows 8.1, Windows 8, Windows 7 SP1)
3. A 64 MB or higher-capacity SD/SDHC/SDXC memory card (both commercially available)
4. An SD card reader/writer (commercially available) or an SD card slot built into the computer
5. A fully charged battery pack for the camera
6. Compact power adapter bundled with the camera
7. The firmware (the downloaded file)
History:
Changes in Version 1.0.4.0:
Note: The phenomena described below only occur in Version1.0.3.x.
1. Fixes a phenomenon in which the frame rate on the MP4 index screen is always shown as 23.98P. (This only occurs on the MP4 index screen; the frame rate shown during playback is correct.)
2. Fixes a phenomenon in which the camcorder doesn't start up in some cases when the mode is switched from the MP4 index screen (MEDIA mode) to CAMERA mode. (When this phenomenon occurs, the camcorder can be restored by removing then reinserting the battery.)
Changes in Version 1.0.3.0:
1. IP streaming has been added, which is an image (video) transmission method.
2. Slow and fast motion recording function has been added for the MP4 format.
3. Improved zoom operation when using the Browser Remote application.
4. Improved the user interface to simplify configuration of the camcorder network settings.
Changes in Version 1.0.2.0:
1. Adds an image mode that reduces the level of noise during shooting.
2. Corrects the pre-recording control mechanism when recording in MP4 format.
Changes in Version 1.0.1.0:
1. Corrects a phenomenon that in which after returning the Camcorder from Power Save mode, footage captured in MXF format (on CF card) may be shaky.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Singapore Pte. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.