19-Jul-2016
0400263702
I have read and understood the disclaimer below
and wish to download the designated software
Details of changes made to the firmware
Firmware Version 01.030100/02.020000 incorporates the following improvements:
1. Support for the 1280x800 and 1600x1000 resolution settings of input devices has been added.
2. Corrects a malfunction where the LAN connection may be interrupted when using Crestron Fusion to connect the projector to a computer.
3. Power consumption will increase when a physical LAN connection is not established, the "Network function" is set to "ON", and the "Network standby settings" is set to "Low-power" in the main menu.
Firmware Update:
A firmware update is required if the firmware version is as follows:
01.000000~01.020000(*1)
02.000000~02.010000(*2)
*1: please copy the firmware in the 01.030100 folder.
*2: please copy the firmware in the 02.020000 folder.
A firmware update is not required if the firmware version is as follows:
01.030100
02.020000
Please be extremely cautious because if you use incorrect firmware version for the firmware update, the menu will return to default settings.
After the firmware update, it is possible to restore the projector to a previous firmware version. For customers who wish to restore the projector to a previous firmware version, please contact your local service center.
For details on how to check the firmware version, please see the manual for the projector.
Preparations for updating the firmware
If you wish to perform the firmware update, please download the firmware and the firmware update procedure guide from our Web site.
Regarding the Software Included in this Firmware
The software included in this firmware is comprised of software modules developed by both Canon and third parties.
Software Developed by Canon and Free Software
Software developed or created by Canon and accompanying document is protected by copyright law, terms of an international convention and any other governing laws.
This product uses software modules under copyright by third parties and distributed as free software. Some of these software modules are subject to the GNU General Public License v2 (GPL), GNU Lesser General Public License v2.1 (LGPL) or any other license.
Display of License Information of Free Software Modules Included in this Firmware
The license information required to be displayed for the free software modules included with this firmware is saved in the download file. If you want to check the license list, please see the ThirdPartySoftware.pdf file in the thirdparty_software\LICENSE folder. Furthermore, if you want to check the license for each of the free software modules, please see the text file stored in the thirdparty_software\LICENSE folder.
Obtaining Source Codes of Free Software
Some free software modules require the acquisition of the source code in order to distribute the executable form of those software modules. To obtain the source code for the software modules, please contact the Canon Regional Headquarters for your country of residence.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Singapore Pte. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.