13-Nov-2015
0400109002
I have read and understood the disclaimer below
and wish to download the designated software
Printer firmware for iPF8100.
Modifications from Ver. 1.42 to Ver.1.43
1. Network communication failure when receiving a specific packet was modified.
Modifications from Ver.1.39 to Ver.1.42
1.The fairly infrequent problem of printer not being able to retrieve from sleep mode has been fixed.
2.A problem after roll-paper-end in the middle of printing has been fixed.
Modifications from Ver.1.37 to Ver1.39
1.The problem in printing from software RIP, where uneven printing which does not exist in data may occur in rare cases has been fixed.
2.The problem that "2F26" error would be indicated in rare cases when using the paper width detection "OFF" has been fixed.
Modifications from Ver.1.36 to Ver.1.37
1.In case the nozzles are clogged, formerly you would stop printing and check the printout, and then continue printing by pressing the Online key.
Now it automatically checks the level of clogging, and if it is possible to print it will continue printing, and if it needs a printhead replacement, it will display a Replace Printhead message.
This modification will greatly improve the workability.
2.[Paper Details]/[Return Defaults] function has been fixed.
3.A function to display the expected time of print completion when printing job data stored in HDD in the printer has been added.
Modifications from Ver.1.35 to Ver.1.36
1.Revise the message that makes the ink level detection disable (Languages other than Japanese)
2.Add the paper jam detection function using cutting operation
3.Permanent countermeasures are taken against the issue that the initial ink filling not completed correctly and error 2F2F or 4048 occurs. (The pump structure of the ink tank unit has been changed.)
Install the Firmware Update Tool if it is not installed.
Install the Firmware Update Tool if it is not installed.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Singapore Pte. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.