21-Oct-2022
0400108602
I have read and understood the disclaimer below
and wish to download the designated software
Printer firmware for iPF6410/iPF6460.
Modifications from Ver. 1.29 to Ver.1.35
1.Remote maintenance control is modified for security enhancement.
2.The eject cut disable when using "Canon Glossy Photo Paper HG (heavy weight)."
3.Network setting disable with Remote UI in French and Italian is modified.
4.The rare error that occurs at turning around in the unidirectional printing.
5.Windows 11 and Windows Server 2022 have been added to the supported OS.
6.The macOS Monterey 12 has been added to the supported OS.
Modifications from Ver. 1.25 to Ver.1.29
1.Optimization of access control.
2.Modification of the failure that error lights in rare case when [System Setup]-[Shut Down Timer] is OFF.
Modifications from Ver.1.21 to Ver.1.25
1. Optimization of internal control.
Modifications from Ver. 1.18 to Ver.1.21
1. Decrease of operation noise at Ink installation and stirring ink.
2. Improvement of detecting function in print head failure and optimization of process sequence.
3. Modification of the failure, in very rare case, that occurs low density ink and printing noise when data designating blank lay over a horizontal line.
4. Modification of the failure, in very rare case, that display error on the panel occurs when selecting one of these languages as a display language : Russian, Chinese, Korean, or Portuguese.
Modifications from Ver.1.16 to Ver.1.18
1.The failure rarely happens that the printer does not retrieve from sleep mode has been fixed.
2.Minor bug has been fixed.
Modifications from Ver.1.00 to Ver.1.16
1.The set value of the Nozzle Check interval has been changed as follows:
Before: *Standard, 1 page
After: *Standard, 1 page, 10 pages, Off
*factory shipment value
2.Added the new sequence that all pinch rollers are lifted to release roll paper when the LED of "JAM1" and "JAM2" message lights.
3."OFF mode" of paper leading edge detection function for roll paper feeding has been added.
Install the Firmware Update Tool if it is not installed.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Singapore Pte. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.