19-Dec-2024
0200557903
I have read and understood the disclaimer below
and wish to download the designated software
Media Configuration Tool is a software utility that registers new media types to the printer according to your choice of paper.
[Ver.1.8.4]
- The supported models have been added.
[Ver.1.8.3]
- The supported models have been added.
[Ver.1.8.2]
- The modules for supporting the language have been updated.
[Ver.1.8.1]
- The supported models have been added.
[Ver.1.7.0a]
- The internal processing has been updated.
[Ver.1.7.0]
- Windows 11 has been added as a supported OS.
- Windows Server 2022 has been added as a supported OS.
- The supported models have been added.
[Ver.1.5.1]
- The supported models have been added.
[Ver.1.5.0a]
- The supported models have been added.
[Ver.1.4.5]
- The supported models have been added.
[Ver.1.4.0]
- The supported models have been added.
[Ver.1.3.0]
- Windows Server 2019 has been added as a supported OS.
- The supported models have been added.
[Ver.1.2.0]
- The supported models have been added.
[Ver.1.1.2]
- The problem that Media Configuration Tool may be terminated forcibly when [Add Media information] or [Create Custom Paper] is operated has been rectified.
[Ver.1.1.1]
- Windows Server 2016 has been added as a supported OS.
- The supported models have been added.
[Ver.1.1.0]
- Windows 10 has been added as a supported OS.
Windows 11
Windows 10(32bit)
Windows 10(64bit)
Windows 8.1(32bit)
Windows 8.1(64bit)
Windows 7 SP1 or later(32bit)
Windows 7 SP1 or later(64bit)
Windows Server 2025
Windows Server 2022
Windows Server 2019(64bit)
Windows Server 2016(64bit)
Windows Server 2012 R2(64bit)
Windows Server 2012(64bit)
Windows Server 2008 R2 SP1 or later(64bit)
When adding media information to PRO-1000/PRO-500 which firmware version is v3.010 or later, be sure to use Media Configuration Tool v1.4.0 or later.
Download / Installation Procedures
1. Download the file. For the location where the file is saved, check the computer settings.
2. Double-click the downloaded EXE file to decompress it, then installation will start automatically.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Singapore Pte. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.
