21-Sep-2021
0200358002
I have read and understood the disclaimer below
and wish to download the designated software
You can use this program to update the printer firmware version.
[Ver.24.01]
- This file is for OS X 10.7 or earlier versions only. For details, refer to the OS information given in the contents.
The following hardware and software are recommended for this software.
Software:
OS X v10.7, English edition
OS X v10.6, English edition
Hardware:
Any computer running the software listed above.
Printers:
Canon imagePROGRAF series
Interface Connectivity:
The printer and computer where this program is executed must be connected with either of the following methods.
- Connected via a Bonjour and capable of printing via the network.
- Connected via a USB cable and capable of printing as a local printer.
- Requires Administrator access rights.
- Before you start the firmware version update program, close any other applications that are running.
- Do not try to use the printer while the firmware version update program is running. If a print job is executing, cancel the print job or wait for the job to finish before you execute the version update program.
- Never switch off the target printer while the firmware version update program is running.
- If you are unable to connect to the Internet to get the latest information, perform the following procedure.
1. Access the Canon website from a computer that can connect to the Internet and download the firmware corresponding to your printer.
2. Copy the downloaded firmware to the computer where this program is installed.
3. Run this program, select "Specify the Firmware", and specify the downloaded firmware.
- If the firmware version update fails while writing to the flash ROM, you may not be able to start the printer. In this case, contact a Canon service center or the dealer where you purchased the printer.
(1) Switch the printer on.
(2) When you have downloaded the file, decompress it on your computer hard disk.
(3) Execute the iPFFirmwareUpdateTool.pkg file.
The imagePROGRAF Firmware Update Tool is installed.
(4) Execute the installed imagePROGRAF Firmware Update Tool.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Singapore Pte. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.