18-Aug-2015
0200217402
I have read and understood the disclaimer below
and wish to download the designated software
Color Calibration Management Console is software that allows you to view the color calibration status and execute color calibration on multiple printers.
You can also acquire color measurement data and execute color checks on printers that have a spectrophotometer unit installed.
Modifications from Ver.1.10 to Ver.2.00
1. The iPF6400S Series/iPF8400S Series have been supported.
2. Windows8 has been supported.
3. The changes include improvement of operation, and the function regarding printer search and color check schedule settings have been added.
The following hardware and software are recommended for this software.
Software:
Microsoft Windows 10, English edition
Microsoft Windows 8.1, English edition
Microsoft Windows 8, English edition
Microsoft Windows 7, English edition
Microsoft Windows Server 2008, English edition
Microsoft Windows Vista, English edition
Microsoft Windows Server 2003 R2, English editio
Microsoft Windows Server 2003, English edition
Microsoft Windows XP, English edition
(Note)
- Not available on 64-bit version of Windows.
- For the Windows OS, use the latest version of Service Pack.
Recommended operating environment:
Any computer running the software listed above
Printers:
Canon imagePROGRAF iPF6400
Canon imagePROGRAF iPF6400S
Canon imagePROGRAF iPF6410
Canon imagePROGRAF iPF6410S
Canon imagePROGRAF iPF6450
Canon imagePROGRAF iPF6460
Canon imagePROGRAF iPF8400
Canon imagePROGRAF iPF8400S
Canon imagePROGRAF iPF8410
Canon imagePROGRAF iPF8410S
Canon imagePROGRAF iPF9400
Canon imagePROGRAF iPF9400S
Canon imagePROGRAF iPF9410
Canon imagePROGRAF iPF9410S
(Some printer models are available in the limited countries or areas.)
(Note)
- Windows versions other than English Windows cannot be used.
- You must log into Windows as an Administrator before the installation.
- before performing the installation, close all the other application software.
- If Cutting Mode in the Paper Menu of the printer control panel is set to User Cut, Cut the Paper before starting color measurement.
- For more about installation the procedure, please refer to the manual.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Singapore Pte. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.