Print   
Maximum Printing Resolution 2400 (horizontal)*1 x 1200 (vertical) dpi
Print Head / Ink Type: Individual Ink Cartridge
Nozzle Per Chip: 1,536 nozzles x 12 colors (18,432 nozzles)
Min. Ink Droplet Size 4 pl
Ink Tank: PFI-50 Matte Black / Photo Black / Cyan / Magenta / Yellow / Photo Cyan / Photo Magenta / Gray / Photo Gray / Red / Blue / Chroma Optimizer
Ink Capacity: 80 ml
Maintenance Cartridge: MC-20
Print Speed*2 Photo (A3+ with border)
Colour LU-101 Approx. 2 min  30 sec 
Grayscale LU-101 Approx. 2 min  30 sec 
Photo (A2 with border)
Colour LU-101 Approx. 3 min 35 sec
Grayscale LU-101 Approx. 3 min 35 sec
Printable Width Rear Tray: 89 - 432 mm
Manual Feed Slot: 203.2 - 432 mm
Paper Size A5, A4, A3, A3+, A2, B5, B4, B3, 4 x 6", 5 x 7", 8 x 10", 10 x 12", 14 x 17", 17 x 22", Letter, Legal, Ledger
Paper Thickness Rear Tray: Plain Paper: 64 - 105 g/m2, Canon Specialty Paper: Max.300 g/m2 (0.1 - 0.3 mm)
Manual Feed Slot: Canon Specialty Paper: Max.400 g/m2 (0.1 - 0.7 mm)
Minimum Printable Paper Length Rear Tray: Plain Paper: 64 - 105 g/m2, Canon Specialty Paper: Max.300 g/m2 (0.1 - 0.3 mm)
Manual Feed Slot: Canon Specialty Paper: Max.400g/m2 (0.1 - 0.7mm)
Maximum Printable Paper Length Rear Tray: 127 mm
Manual Feed Slot: 254 mm
Printable Area Recommended Printable Area: Top margin: 57 mm, Bottom margin: 55 mm, Left / Right: 3.4 mm
(Letter / Legal: Left margin 6.4 mm, Right margin 6.3 mm)
Bordered Printing: Top margin 3 mm, Bottom margin 5 mm, Left / Right margin 3.4 mm
(Letter / Legal: Left margin 6.4 mm, Right margin 6.3 mm)
Borderless Printing*3: Top / Bottom / Left / Right: each 0 mm
(Supported Paper Size: A4, A3, A3+, A2, 4 x 6", 5 x 7", 8 x 10", 10 x 12", 14 x 17", 17 x 22", Letter)
Paper Handling  
Media Feeding Rear Tray / Manual Feed Slot
Paper Handling
(Rear Tray)
(Maximum Number)
Plain Paper A5 / A4 / A3 / B5 / B4 / Letter / Legal / Ledger = 150, A2 / B3 = 20
Photo Paper Pro Platinum (PT-101) 4 x 6" = 20, A4 / A3 / A3+ = 10, A2=1
Photo Paper Plus Glossy II (PP-201) 4 x 6" = 20, A4 / A3 / A3+ = 10
Photo Paper Pro Luster (LU-101) A4 / A3 / A3+ = 10, A2 = 1
Photo Paper Plus Semi-gloss (SG-201) 4 x 6" = 20, A4 / A3 / A3+ / 8 x 10" = 10
Matte Photo Paper (MP-101) A4 / A3 = 10
Lightweight Photo Paper Letter / A4 / A3 / A3+ / A2 / 17 x 22" / Ledger =1
Heavyweight Fine Art Paper Letter / A4 / A3 / A3+ / A2 / 17 x 22" / Ledger =1
Japanese Paper Washi Letter / A4 / A3 / A3+ / A2 / 17 x 22" / Ledger =1
Canvas Letter / A4 / A3 / A3+ / A2 / 17 x 22" / Ledger =1
Red Label Superior 80g/m2 A4 = 130
Canon Oce Office Colour Paper 80g/m2 A4 = 100
Paper Handling
(Manual Feed Slot)
(Maximum Number)
(Maximum Number = 1 sheet each)
Photo Paper Pro Platinum (PT-101) A4 / A3 / A3+ / A2 = 1
Photo Paper Plus Glossy II (PP-201) A4 / A3 / A3+ = 1
Photo Paper Pro Luster (LU-101) A4 / A3 / A3+ / A2 = 1
Photo Paper Plus Semi-Gloss (SG-201) A4 / A3 / A3+ / 8 x 10" = 1
Premium Matte(PM-101) A4 / A3 =1
Matte Photo Paper (MP-101) A4 / A3 / A3+ =1
Lightweight Photo Paper Letter / A4 / A3 / A3+ / A2 / 17 x 22" / Ledger =1
Heavyweight Photo Paper Letter / A4 / A3 / A3+ / A2 / 17 x 22" / Ledger =1
Heavyweight Fine Art Paper Letter / A4 / A3 / A3+ / A2 / 17 x 22" / Ledger =1
Extra Heavyweight Fine Art Paper Letter / A4 / A3 / A3+ / A2 / 17 x 22" / Ledger =1
Japanese Paper Washi Letter / A4 / A3 / A3+ / A2 / 17 x 22" / Ledger =1
Canvas Letter / A4 / A3 / A3+ / A2 / 17 x 22" / Ledger =1
Highest Density Fine Art Paper Letter / A4 / A3 / A3+ / A2 / 17 x 22" / Ledger =1
Detector and Adjustment  
Registration adjustment Automatic / Manual
Color calibration Yes (with colour calibration notification functions)
Head gap adjustment Automatic / Manual
Non-firing detection Yes
Non-firing compensation Yes
Network  
Interface USB 2.0 Hi-Speed, Wireless LAN b / g / n, Ethernet
Wired LAN Protocol TCP / IP
Network Type: IEEE 802.3 (10base-T) / IEEE 802.3u (100base-TX)
Wireless Network Type: IEEE802.11n / IEEE802.11g / IEEE802.11b
System Requirements
Windows: Windows 10 / Windows 8 / Windows 7 / Windows Vista SP2
Macintosh: Mac OS X 10.7.5 or later
General   
Memory Standard memory: 1 GB
Languages Printer language: SG Raster (Swift Graphic Raster)
Job control: IVEC
Status reply: IVEC
Operation Panel Display: LCD (3.0 inch TFT LCD)
Apple AirPrint Available
Canon Print Inkjet / SELPHY app
(for iOS / Android OS)
Available
PictBridge Available
Operating Environment*4 Temperature: 5 - 35°C
Humidity: 10 - 90% RH (no dew condensation)
Recommended Environment*5 Temperature: 15 - 30°C
Humidity: 10 - 80% RH (no dew condensation)
Storage Environment Temperature: 0 - 40°C
Humidity: 5 - 95% RH (no dew condensation)
Acoustic Noise (PC Print) Photo (4 x 6")*6 Approx. 38.5 dB(A)
Document (A4, B/W)*7 Quiet Mode OFF: Approx. 40.8 dB(A)
Quiet Mode ON: Approx. 40.4 dB(A)
Power Supply Input Power: AC 100-240 V, 50/60 Hz
Power Consumption*8 Approx. 37 W
Standby power consumption Approx. 2.5 W
Power off Approx 0.4 W
Environment Certifications RoHS directive, EPEAT
Dimension (W x D x H) Approx. 723 x 435 x 285 mm
Weight Approx. 32 kg

Specifications are subject to change without notice.
   
*1 Ink droplets can be placed with a pitch of 1/2400 inch at minimum.
*2 Print speed is based on the default setting using ISO/JIS-SCID N5 with Canon consumer inkjet test method and does not take into account data processing time on host computer.
Print speed may vary depending on system configuration, interface, software, document complexity, print mode, page coverage, type of paper used etc.
*3 Paper types NOT supported for borderless printing are as follows: Photo Stickers
*4 The performance of the printer may be reduced under certain temperature and humidity conditions.
*5 For the temperature and humidity conditions of papers such as photo paper, refer to the paper's packaging or the supplied instructions.
*6 When printing ISO/JIS-SCID N2 pattern on Photo Paper Pro Platinum using default settings.
*7 Acoustic Noise is measured based on ISO7779 standard.
*8 When printing ISO/JIS-SCID N2 pattern on A4 size Photo Paper Pro Platinum (PT-101) using default settings.

Disclaimer
   
You need to install ink tanks or ink cartridges of all colours whether you perform black and white printing or colour printing. If any one of the ink tanks or ink cartridges is not installed, an error occurs and you cannot perform printing.
Depending on the paper or the print settings, colour ink may be consumed even when you print a document in black or perform printing in black and white. When any one of the colours of ink has run out, you need to replace the ink tank or ink cartridge.
When you use the Canon printer for the first time after you install the bundled ink tanks, the printer consumes a small amount of ink in the amount to enable printing by filling the nozzles of the Print Head with ink. For this reason, the number of sheets that can be printed with the first ink tanks is fewer than the succeeding ink tanks.
When using the printer for the first time after installing the ink tanks which are bundled with the printer, a certain amount of ink is consumed to set up the printer for printing.

For this reason, the printable volume of the ink tanks which are bundled with the printer will be less than that of subsequent replacements.

Since the maintenance cartridge is filled with the ink which is ejected for the initial set up mentioned above and its remaining capacity is consumed approximately 50%, the timing of replacing the maintenance cartridge becomes sooner than that of subsequent replacements.
The printing costs described in the brochures or websites are based on the consumption data from not the first ink tank / ink cartridge but the succeeding ink tank / ink cartridge.
A certain amount of ink is consumed in regular operations performed automatically to keep printer performance, such as print preparation, ink path bubble removal and print head cleaning.
The maintenance cartridge is also consumed for this operation.

[Cleaning function]
The cleaning function helps the printer to suck air bubbles or ink itself from the nozzle and thus prevents print quality degradation or nozzle clogging.?
The repairing parts for printers will be available five years after production is discontinued. Depending on your model, we may ask you to replace it with a new one, or one with almost the same performance as a maintenance service. In this case, it may be that you cannot use supplies or accessories for your model or the compatible OS will be changed.
The warranty term for details, contact a Canon-authorized sales representative in the country or region you live in. Free repair does not apply to supplies (paper, ink tanks/cartridges, and print head) even within the warranty term.
To obtain good printing quality, use up ink within six months after opening.
Regarding a solution to a problem caused by using non-genuine ink cartridges (including ones supplemented with non-genuine ink by making a hole in the cartridge or so), a fee will be charged even within the warranty term. Keep this in your mind when you use non-genuine ink.
If you use non-genuine ink cartridges (including ones supplemented with non-genuine ink by making a hole in the cartridge or so), they may have a negative effect on the performance of the printer or the printing quality may be reduced. In addition, though it is a rare case and does not present a safety hazard, it is reported that a print head will become heated or smoke will be emitted from it due to an ingredient not contained in genuine Canon ink. (Note that this does not apply to all non-genuine ink.)
The following functions are available only on printers that use genuine Canon ink for all colours and support these functions. For supported functions, see the product specifications section for each model.
• Printing CREATIVE PARK PREMIUM content via My Image Garden(Windows only), Easy-PhotoPrint+, or PIXMA Cloud Link
Depending on your terminal, such as a computer or a smartphone, or the operating system of the terminal, such as your computer or smartphone, the estimated ink level information or message displayed on the screen of your terminal may be different from the information or message displayed on the operation panel of the printer. Also, a part of the estimated ink level message displayed on the operation panel of the printer may not be displayed and / or may be displayed at a different point in time. Canon recommends that you use the information and massage displayed on the operation panel of the printer as your reference. Note, however, that the information and message are displayed items serve only as a guideline information.
If you tilt the printer or turn it on its side or upside down, ink may leak. For this reason, when transporting the printer, to prevent the ink leakage, the ink in the printer and a certain amount of ink in the ink tanks need to be ejected into the maintenance cartridge.

If the maintenance cartridge does not have the remaining capacity enough for ejected ink, you need to replace it with a new one. Up to three maintenance cartridges are required.
If replacement of the maintenance cartridge is not possible, printer transport preparation cannot be executed. We recommend you prepare maintenance cartridges before executing printer transport preparation.

However, the maintenance cartridge removed for printer transport preparation may still have the remaining capacity for printing. In such cases, the removed maintenance cartridge can be reinstalled for use.

When you first use the printer after executing printer transport preparation, a certain amount of ink is consumed to set up the printer for printing. The maintenance cartridge is also consumed for this set up.
CO (Chroma Optimizer) ink is applied onto the print side of paper to adjust glossiness. This ink is also consumed in order to keep printer’s performance and maintain ensure good print quality by maintaining good printer performance, even when not applied onto the print side. As a result, the CO ink may be consumed more than the other inks.
While using the printer, the maintenance cartridge may be filled with the ejected ink.

When the maintenance cartridge is filled, printing will stop to prevent ink leakage from a maintenance cartridge, and you need to replace it with a new one.

You need to purchase a new maintenance cartridge in advance and replace the filled one with the new one by yourself in accordance with the instructions.