Consumer Business
Canon Online Store
ENG
Consumer
Switch to: Business
Warranty Support
ENG
  1. Support
  2. Search
  3. Download
Contact Us

    Setting the camera to HDR (High Dynamic Range) mode (EOS M3)

    06-Feb-2015
    8202470400

    Solution

      When the camera is set to HDR (High Dynamic Range) mode, three consecutive images are captured at different brightness levels each time you shoot, and the camera combines image areas with optimal brightness to create a single image. This mode can reduce the washed-out highlights and loss of detail in shadows that tends to occur in high-contrast shots.
      NOTE
      • [ ] cannot be set.
      • If the Image Quality has been set to [ ] or [ ], it will be changed to [ ] when the camera is set to [Creative Filters] () mode.

      1. Press the power button to turn the camera on.



      2. Set the mode dial to [ ] , and then press the [ ] button.



      3. Press the [ ], [ ] buttons to choose [Shooting Mode]. (If the default settings have not been changed, [ ] will be displayed.)





      4. Press the [ ], [ ] buttons or turn the [ ] dial to choose [HDR] (), and then press the [ ] button.



      5. After choosing [HDR] mode, turn the [ ] dial to choose a color effect.
      • A preview is shown of how your shot will look with the effect applied.
      *[Art Vivid] has been selected in the example image below.



      Available options are shown below.
      NaturalImages are natural and organic.
      Art StandardImages resemble paintings, with subdued contrast.
      Art VividImages resemble vivid illustrations.
      Art BoldImages resemble oil paintings, with bold edges.
      Art EmbossedImages resemble old photos, with bold edges and dark ambiance.

      6. Shoot.
      • Hold the camera steady as you shoot. When you press the shutter button all the way down, the camera will take three shots and combine them.
      IMPORTANT
      • Excessive motion blur or certain shooting conditions may prevent you from obtaining the desired results.
      NOTE
      • If excessive camera shake interferes with shooting, mount the camera on a tripod or take other measures to keep it still. Additionally, you should set [IS Mode] to [Off] when using a tripod or other means to secure the camera.
      • Any subject movement will cause images to look blurry.
      • There will be a delay before you can shoot again, as the camera processes and combines the images.