Setting Continuous Shooting (PowerShot N2)
16-Oct-2014
8202253900
Solution
Hold the shutter ring all the way down to shoot continuously. You can shoot approximately 2.7 shots/sec.
IMPORTANT
- In the following example procedure, the camera's shooting mode has been set to [Auto] (
). - Cannot be used with the self-timer.
- Shooting may stop momentarily or continuous shooting may slow down depending on shooting conditions, camera settings, and the zoom position.
- As more shots are taken, shooting may slow down.
- Shooting may slow down if the flash fires.
- With Touch Shutter, the camera shoots continuously while you touch the screen. Focus and exposure during continuous shooting remain constant, after they are determined for the first shot.
- Continuous shooting cannot be set in the following modes:
-[Creative Shot] (
), [Hybrid Auto] (
), [Self Portrait] (
)
), [Hybrid Auto] (), [Self Portrait] ()1. Press the <Power> button to turn the camera on.
2. Touch [ FUNC.].
3. The following screen appears.
Drag up or down to choose [Drive Mode] (
), 
and display the list of [Drive Mode] settings.4. Touch [Continuous] (
).
).
5. The following screen appears.
4. If the icon for [Continuous] () is displayed in the upper left of the screen, the setting procedure is complete.
) is displayed in the upper left of the screen, the setting procedure is complete.Hold the shutter ring all the way down to shoot continuously.
REFERENCE
If you use Face ID in [ ], the name recorded in the image will be fixed to the location where it is displayed in the first shot. Even if the subject moves, the name will stay fixed in the same position for any subsequent shots.
], the name recorded in the image will be fixed to the location where it is displayed in the first shot. Even if the subject moves, the name will stay fixed in the same position for any subsequent shots.