Consumer Business
Canon Online Store
ENG
Consumer
Switch to: Business
Warranty Support
ENG
  1. Support
  2. Search
  3. Download
Contact Us

    How to change Control Ring functions (PowerShot S110)

    18-Sep-2012
    8201644700

    Solution

    You can change the functions assigned to the <Control Ring> so that these settings will be easier to operate.
    NOTE
    • If the <Control Ring> settings are changed, the <Control dial> settings are changed as well.
    <Control Ring>
    <Control dial>

    1. Turn on the camera.

    2. Press the <RING FUNC.> () button.




    3. The following window appears.



    Press the <RING FUNC.> () button or operate the <directional buttons> left or right to choose an option.
    After the selection is made, press the <FUNC./SET> () button.


    4. The following window appears.



    The function assigned to the <Control Ring> appears.
    The function assigned to the <Control dial> appears.
    NOTE
    • You can also configure this setting by pressing the <> button, touching an option to choose it, and then touching it again.


    Functions Assignable to the Control Ring
    The functions you can assign to the control ring are different depending on the shooting mode.
    Assignable FunctionShooting mode
    [Manual]
    		[Aperture Priority]
    		[Shutter Speed Priority]
    		[Program]
    [Default Control]
    		Control RingAvAvTvISO
    Control DialTv---
    [ISO speed]
    		Control RingISOISOISOISO
    Control DialTv, Av*AvTv-
    [+/- (Exp.) / Tv]
    		Control RingTv+/-+/-+/-
    Control DialAvAvTv-
    [Focus]
    		Control RingYou can use the manual focus.
    [White Balance]
    		Control RingYou can correct the white balance.
    [Step Zoom]
    		Control RingYou can use the step zoom.
    [i-Contrast]
    		Control RingYou can set i-Contrast.
    [Aspect ratio]
    		Control RingYou can change the aspect ratio.
    [Custom]
    		-You can assign functions to your liking.

    • Av: aperture value, Tv: shutter speed, ISO: ISO speed, +/–: exposure compensation.
    • With [Focus] (), [White Balance] (), [Step Zoom] (), [i-Contrast] () and [Aspect ratio] (), the functions assignable to the<Control Dial> are the same as with [ISO speed] ().
    * Press the < directional buttons > upward to switch between setting Tv and Av.
    NOTE
    • Icons labeled with [ ] indicate that the function is not available in the current shooting mode or under current function conditions.
    • The <> ring can be used for step zooming in <>, <>, or movie mode.