• Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused.

    Down-converting movies for video-sharing Web sites

    05-Apr-2011
    8201123300

    Solution

    You can convert your high-definition scenes into standard-definition movies in the camcorder and then use the supplied PIXELA’s software in order to upload them to your favorite video sharing Web site. You can even decorate scenes so your unique decorations will be embedded in the converted SD movies.

    This section explains the details on how to convert uploaded video to standard-definition* (MPEG2 format).
    NOTE
    When being converted, video is copied from the built-in memory to the memory card slot B; or the memory card slot A to the memory card slot B.
    • When video is converted while being copied from the built-in memory to a memory card
    • When video is converted while being copied from one memory card to another

    Down-converting selected scenes, scenes recorded on a specific date, and all of the scenes for video-sharing Web sites at once
    You can down-convert selected scenes, scenes recorded on a specific date, and all the scenes from the index screen at once.

    1. Make sure there is a memory card in memory card slot with sufficient available space.


    2. Press < > to switch to movie playback mode.


    3. Open the date index screen.
    Check that you have selected the tab (built-in memory) or tab (memory card A).
    To convert all the scenes recorded on a specific date, drag your finger left/right until the desired date appears in the title bar.




    4. Touch [Edit].


    NOTE
    • Drag your finger left/right until the date of the scenes you want to convert appears in the title bar. By pressing the <WEB> button, you can convert all the scenes recorded on a specific date.


    5. Touch [Convert HD -> SD].




    6. Select one of the options for converting multiple scenes.



    DateConverting scenes recorded on a specific date
    Select*Converting selected scenes
    All ScenesConverting all the scenes

    *Touch on the individual scenes you want to convert.
    A checkmark will appear on the scenes you touch. The total number of selected scenes will appear next to the [ ] icon.
    After selecting all the desired scenes, touch [OK].


    NOTE
    • If a copyright notice appears, read it carefully and touch [OK] if you agree.

    7. Review the conversion settings and touch [Next].



    Required memory capacity to convert to standard definition
    Recording time
    Number of scenes after conversion
    NOTE
    Before touching [Next], you can touch [ ] to change the conversion settings as described below.
    • To select the bit rate
    Using a higher bit rate will result in better video quality for the converted scenes, while a lower bit rate will result in smaller file sizes and faster uploads.
    Touch [ ] -> [Bit Rate (Quality)] to select either [3 Mbps] or [9 Mbps].
    • To automatically divide scenes
    If you are converting a long scene, you can have the camcorder divide it into 10-minute SD movies to make uploading easier.
    Touch [ ] -> [Auto Divide] to select [On].


    8. Touch [ ] to convert the scenes.


    NOTE
    • Adding decorations
    Touch [ ]. For details on how to use the decoration tools, see Related information.
    • Adjusting the [Music Balance] or [Speaker Volume]
    Touch [ ], and touch the left/right marks in the adjustment bar, or drag your finger left/right on the bar to make adjustments.

    Touch [ ] to interrupt the operation while it is in progress.


    9. When the conversion is completed, the following screen appears.



    • When uploading directly from a computer
    After the camcorder is connected to a computer via the supplied USB cable, the supplied PIXELA’s software start screen appears, so upload the data.
    • When touching [End Without Connecting]
    The screen switches to the built-in memory or memory card slot A from which the data is converted. When uploading data, make sure to switch from the video index screen first, and then connect it to a computer.

    For details on how to upload data, please see the supplied PIXELA’s software Instruction Manual.
    NOTE
    You can play back and delete the converted SD movies from the [SD Movies] index screen on the memory card used for the conversion.


    Converting Scenes into Standard Definition from a Story by Rating
    From the gallery screen, the scenes from a story are converted to standard definition (an MPEG2 format) by rating.
    NOTE
    When converting scenes from a story
    • All the scenes are merged into one converted SD movie.
    • If the converted SD movie is too large, it will be split into smaller 10-minute long movies when [Auto Divide] is set to [On].
    • The maximum total playback time of the scenes to be converted is 2 hours and 30 minutes.

    1. Make sure there is a memory card in memory card slot with sufficient available space.

    2. Press < > to switch to movie playback mode.

    3. Open the gallery. Check that you have selected the tab (built-in memory) or tab (memory card A).



    4. Select the desired story.
    Bring the desired story to the front.



    5. Open the [Play by Rating] screen.
    5-1. Touch [Story Details].



    5-2. Touch [Play by Rating].



    5-3. Touch the desired rating and then touch [ ].



    6. Press <WEB>.
    NOTE
    You can also convert scenes by touching [Edit] -> [Convert -> SD].

    7. Review the conversion settings and touch [Next].
    Proceed to Step 7 for "Down-converting selected scenes, scenes recorded on a specific date, and all of the scenes for video-sharing Web sites at once".

    Converting Only Part of a Scene or Story
    1. Make sure there is a memory card in memory card slot with sufficient available space.


    2. Press < > to switch to movie playback mode.


    3. Play back the scene or story that you want to partially convert.

    • When converting only part of a scene
    Display the index screen for the built-in memory or memory card slot A, from which data is converted, and touch the scene.

    • When converting only part of a story.
    Display the gallery screen for the built-in memory or memory card slot A, from which data is converted, and touch the story.


    4. Pause the playback where you want the converted SD movie to begin.
    4-1. Touch the screen to display the playback controls.

    4-2. Touch [ ] where you want the converted SD movie to begin.




    5. Press <WEB> button.


    6. Review the conversion settings and touch [Next].
    Proceed to Step 7 for "Down-converting selected scenes, scenes recorded on a specific date, and all of the scenes for video-sharing Web sites at once".

    NOTE
    The video from the playback pause until the end of the scene/story (or up to a maximum of 10 minutes, in case of longer scenes/stories) will be converted to standard definition.