• Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused.

    Formatting a Memory Card

    25-Jul-2012
    8201074500

    Solution

      There are two types of formatting, general formatting and low-level formatting.

      In the following cases, formatting your memory card with your camera is recommended.
      • When using a newly purchased memory card.
      • When using a memory card that has been formatted with another camera or a computer.


      If you encounter one of the following problems, performing a low-level format may solve it.
      • The [Memory card error] message appears.
      • The speed at which images are written to or read from the memory card has been reduced.
      • Movie shooting stops partway.
      • The camera does not work properly.
      IMPORTANT
      • Formatting (initializing) a memory card erases all data on the memory card. Copy the data from the memory card to a computer or other devices before formatting.
      • Formatting or erasing data on a memory card merely changes the file management information on the card and does not ensure its contents are completely deleted. Be careful when transferring or disposing of a memory card. When disposing of a memory card, take precautions such as physically destroying the card to prevent personal information leaks.
      • With Eye-Fi cards, please install the software included on the card to your computer before initializing the card.
      NOTE
      • The total capacity of the memory card displayed in the formatting screen may be less than indicated on the memory card.

      1. Press the <Power> button on the camera.


      2. The following screen appears on the LCD monitor.



      Touch [FUNC.] () on the lower-left hand side of the screen.


      3. The following screen appears on the LCD monitor.



      Touch [MENU] ().


      4. The following screen appears on the LCD monitor.



      Touch the [Set up] () tab.
      Drag up or down the screen to touch [Format].


      5. The following screen appears on the LCD monitor.



      Touch [OK].
      NOTE
      • When performing low level formatting, Touch the frame to the left of [Low Level Format] to display a () mark.
      • Low level formatting may take longer than standard formatting, since all recorded data are erased.
      • You can stop a low level format of a memory card by touching [Stop]. When stopping low level formatting, the data will be erased but the memory card can be used without problem.


      6. The following screen appears on the LCD monitor.



      Touch [OK].


      The following screen appears, and then the memory card is formatted (initialized).





      7. The following screen appears on the LCD monitor.



      Touch [OK].