• Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused.

    Document Stored in Machine's Memory

    24-Dec-2010
    8200995900

    Solution

    If the sending faxes is not complete or the machine was not able to print the received faxes, these faxes are stored in machine's memory.
    If an error occurred during a fax transmission, the document is not stored in machine's memory.
    In the following cases, the machine is not able to print the received fax and will automatically store the fax in its memory.

    • The amount of remaining ink is insufficient to print a fax.
    • Paper has run out.
    • A different size of paper from that specified by Page size is loaded.
    • Page size is set to other than A4, Letter, LTR, or Legal.
    REFERENCE
    • Some of page sizes are not available depending on the country or region of purchase.

    • Media type is set to other than Plain paper.
    • Do not print is selected for Received documents in Auto print settings under Fax settings.
    • You pressed the Stop button to cancel printing of a received fax.
    IMPORTANT
    • If you unplug the power cord of the machine, all faxes stored in machine's memory are deleted.

    You can print or delete the faxes stored in machine's memory. You can also save the received faxes stored in machine's memory on the USB flash drive.
    • To print a document in machine's memory:
    -> [ Printing a Document in Machine's Memory ]
    • To delete a document in machine's memory:
    -> [ Deleting a Document in Machine's Memory ]
    • To save a document on a USB flash drive
    -> [ Saving a Document in Machine's Memory to USB Flash Drive ]
    REFERENCE
    • When confirming, printing, or deleting a document stored in machine's memory, you specify it by its transaction number. If you do not know the transaction number for your target document, print the list of documents first.
    • For details on how to print the list of documents, see [ Printing a List of the Document in Machine's Memory ].

    Printing a Document in Machine's Memory
    You can print a specified document in machine's memory or print all the documents in its memory at a time.
    When printing a specified document, you specify it by its transaction number. If you do not know the transaction number for your target document, print the list of documents first.
    REFERENCE
    • The memory list shows the transaction number of the unsent or unprinted fax (TX/RX NO.), transaction mode, recipient's number, and the date and time of the transaction.

    - Printing a List of the Document in Machine's Memory
    Print the list of the documents following the procedure below.

    1. Make sure that the machine is turned on.

    2. Load paper.
    Refer to [ Loading Paper ].

    3. Press the FAX button.
    The Fax standby screen is displayed.

    4. Press the Menu button.
    The Fax settings screen is displayed.

    5. Use the button to select Memory reference, then press the OK button.
    REFERENCE
    • If no document is stored in machine's memory, No documents in memory is displayed on the LCD.

    6. Use the button to select Print memory list, then press the OK button.
    The list of documents stored in machine's memory is printed.
    REFERENCE
    • A transaction number from "0001" to "4999" indicates a document being sent. A transaction number from "5001" to "9999" indicates a document being received.

    - Printing a Specified Document in Machine's Memory
    Specify the document and print it following the procedure below.

    1. Make sure that the machine is turned on.

    2. Load paper.
    Refer to [ Loading Paper ].

    3. Press the FAX button.
    The Fax standby screen is displayed.

    4. Press the Menu button.
    The Fax settings screen is displayed.

    5. Use the button to select Memory reference, then press the OK button.

    6. Use the button to select Print specified doc., then press the OK button.
    The document selection screen is displayed.


    REFERENCE
    • A transaction number from "0001" to "4999" indicates a document being sent. A transaction number from "5001" to "9999" indicates a document being received.
    • Each mark before the transaction number indicates the following:
    No mark: Indicates a black and white document.
    : Indicates a color document.
    : Indicates the document during transmission.
    &: Indicates the document sent with sequential broadcasting.
    • By pressing the button or the Tone button, the transaction number displayed on the LCD is switched to transaction time or fax/telephone number.

    7. Use the button to select the transaction number (TX/RX no.) of the document you want to print, then press the OK button.

    8. Use the button to select whether to print only the first page of the document, then press the OK button.
    • If you select Yes:
    Only the first page of the document will be printed.
    The document is still stored in machine's memory.
    • If you select No:
    All pages of the document will be printed.
    The screen to confirm whether to delete the printed document in machine's memory is displayed.
    If you select Yes using the button and press the OK button, the printed document in machine's memory is deleted.
    REFERENCE
    • If there is not the specified document in machine's memory, No document is displayed, and the machine returns to the previous screen.
    • To print other documents, repeat the procedure from steps 7 and 8.
    • To return to the Fax standby screen, press the Stop button.

    - Printing All the Documents in Machine's Memory
    Print all the documents in machine's memory following the procedure below.

    1. Make sure that the machine is turned on.

    2. Load paper.
    Refer to [ Loading Paper ].

    3. Press the FAX button.
    The Fax standby screen is displayed.

    4. Press the Menu button.
    The Fax settings screen is displayed.

    5. Use the button to select Memory reference, then press the OK button.

    6. Use the button to select Print all RX docs, then press the OK button.

    7. Use the button to select Yes, then press the OK button.
    All the documents in machine's memory will be printed.
    Each time a document is printed, the screen to confirm whether to delete the printed document in machine's memory is displayed.
    If you select Yes using the button and press the OK button, the printed document in machine's memory is deleted.

    Deleting a Document in Machine's Memory
    You can delete a specified document in machine's memory or delete all the documents in its memory at a time.
    REFERENCE
    • When deleting a specified document, you specify it by its transaction number. If you do not know the transaction number for your target document, print the list of documents first.

    - Deleting a Specified Document in Machine's Memory
    Specify the document and delete it following the procedure below.

    1. Make sure that the machine is turned on.

    2. Press the FAX button.
    The Fax standby screen is displayed.

    3. Press the Menu button.
    The Fax settings screen is displayed.

    4. Use the button to select Memory reference, then press the OK button.

    5. Use the button to select Delete specified doc., then press the OK button.
    The document selection screen is displayed.


    REFERENCE
    • A transaction number from "0001" to "4999" indicates a document being sent. A transaction number from "5001" to "9999" indicates a document being received.
    • Each mark before the transaction number indicates the following:
    No mark: Indicates a black and white document.
    : Indicates a color document.
    : Indicates the document during transmission.
    &: Indicates the document sent with sequential broadcasting.
    • By pressing the button or the Tone button, the transaction number displayed on the LCD is switched to transaction time or fax/telephone number.

    6. Use the button to select the transaction number (TX/RX no.) of the document you want to delete, then press the OK button.

    7. Use the button to select Yes, then press the OK button.
    The specified document will be deleted from machine's memory.
    REFERENCE
    • If there is not the specified document in machine's memory, No document is displayed, and the machine returns to the previous screen.
    • To delete other documents, repeat the procedure from steps 6 and 7.
    • To return to the Fax standby screen, press the Stop button.

    - Deleting All the Documents in Machine's Memory
    Delete all the documents in machine's memory following the procedure below.
    REFERENCE
    • This function is not available while the machine is receiving a fax.

    1. Make sure that the machine is turned on.

    2. Press the FAX button.
    The Fax standby screen is displayed.

    3. Press the Menu button.
    The Fax settings screen is displayed.

    4. Use the button to select Memory reference, then press the OK button.

    5. Use the button to select Delete all documents, then press the OK button.

    6. Use the button to select Yes, then press the OK button.
    All the documents in machine's memory will be deleted.

    Saving a Document in Machine's Memory to USB Flash Drive
    You can save the received faxes stored in machine's memory to the USB flash drive as PDF files using the Operation Panel of the machine.
    You can save a specified document in machine's memory to the USB flash drive or save all the documents in its memory to the USB flash drive at a time.
    IMPORTANT
    • Do not remove the USB flash drive from the machine until saving is complete.
    • For safety reasons, we recommend backing up faxes saved on a USB flash drive to another media periodically to avoid unexpected accidents.
    • We assume no responsibility for damage to or loss of data for whatever reason even within the warranty period.
    REFERENCE
    • When saving a specified document, you specify it by its transaction number. If you do not know the transaction number for your target document, print the list of documents first.
    -> [ Printing a List of the Document in Machine's Memory ]
    • After saving the fax in machine's memory to the USB flash drive, the fax is still stored in machine's memory. For details on how to delete the fax in machine's memory, see [ Deleting a Document in Machine's Memory ].

    - Saving a Specified Received Document in Machine's Memory to USB Flash Drive
    Specify the received document and save it on the USB flash drive following the procedure below.

    1. Make sure that the machine is turned on.

    2. Insert the USB flash drive into the Direct Print Port.
    REFERENCE

    3. Press the FAX button.
    The Fax standby screen is displayed.

    4. Press the Menu button.
    The Fax settings screen is displayed.

    5. Use the button to select Memory reference, then press the OK button.

    6. Use the button to select Save specified doc., then press the OK button.
    The document selection screen is displayed.


    REFERENCE
    • A transaction number from "0001" to "4999" indicates a document being sent. A transaction number from "5001" to "9999" indicates a document being received.
    • Each mark before the transaction number indicates the following:
    No mark: Indicates a black and white document.
    : Indicates a color document.
    : Indicates the document during transmission.
    &: Indicates the document sent with sequential broadcasting.
    • By pressing the button or the Tone button, the transaction number displayed on the LCD is switched to transaction time or fax/telephone number.

    7. Use the button to select the transaction number (TX/RX no.) of the document you want to save, then press the OK button.
    The specified document is saved on the USB flash drive.
    REFERENCE
    • If there is not the specified document in machine's memory, No document is displayed, and the machine returns to the previous screen.
    • To save other documents on the USB flash drive, repeat step 7.
    • To return to the Fax standby screen, press the Stop button.

    - Saving All the Received Documents in Machine's Memory to USB Flash Drive
    Save all the documents in machine's memory to the USB flash drive following the procedure below.

    1. Make sure that the machine is turned on.

    2. Insert the USB flash drive into the Direct Print Port.
    REFERENCE

    3. Press the FAX button.
    The Fax standby screen is displayed.

    4. Press the Menu button.
    The Fax settings screen is displayed.

    5. Use the button to select Memory reference, then press the OK button.

    6. Use the button to select Save all documents, then press the OK button.

    7. Use the button to select Yes, then press the OK button.
    All the documents in machine's memory will be saved to the USB flash drive.
    REFERENCE
    • You can save up to 50 pages of fax as one PDF file.
    • You can save up to 2000 PDF files on a USB flash drive.
    • Faxes are saved according to the order of the transaction number when Save all documents is selected.
    • If the USB flash drive is removed or becomes full while saving faxes is in progress, the error message is displayed on the LCD. Press the OK button to dismiss the error.
    • The folder and file name of faxes saved on the USB flash drive is as follows:
    - Folder name: CANON_SC\FAXDOC\0001
    - File name (file extension: PDF): Running numbers, starting from FAX_0001
    - File date: The date and time of saving as set in the machine. For information on how to set the date and time, refer to [ Setting the Date and Time ]

    • Importing Faxes Saved on a USB Flash Drive to the Computer
    You can import faxes saved on a USB flash drive to the computer.
    After saving faxes, connect the USB flash drive to the computer, then import the data.