Solution
IMPORTANT
If you are using a 64-bit operating system
- The MF driver and MF Toolbox for 64-bit operating systems may not be supplied depending on your country or region.
User rights for logging on to Windows
- Log on as a user with administrative rights.
When installing via USB connection
- Connect the USB cable after the software installation.
- Ensure that the power of the machine is turned ON when connecting the USB cable.
Install this software to use the machine.
There are two methods for installing the software. Normally, install it with [Easy Installation].
To install the following software and manuals that cannot be installed with [Easy Installation], select [Custom Installation].
- Presto! PageManager
- e-Manual
* If the User Manual CD-ROM is supplied with the machine, install the e-Manual from the User Manual CD-ROM.
Installing with [Easy Installation]
1. Insert the User Software CD-ROM.
2. Click [Easy Installation].
* The options to be displayed differ depending on your country or region.
NOTE
If the above dialog box does not appear
- If you cannot display the top screen when setting CD-ROM, perform the following operations.
* The CD-ROM drive name is indicated as "D:" in this manual. The CD-ROM drive name may differ depending on the computer you are using.
1. From the [Start] menu, select [Run].
2. Enter "D:\Minst.exe", and then click [OK].
1. Enter "D:\Minst.exe" in [Search programs and files] (or [Start Search]) under the [Start] menu.
2. Press the [ENTER] key on the keyboard.
If a language selection screen is displayed before the CD-ROM setup screen
- Select a language and then click [Next].
3. When the following screen appears, select the connection to a computer.
Click [Next] in [Connect Printer Directly to Computer].
5. Read the contents of the License Agreement, and then click [Yes].
7. Click [Exit].
Next, installation of MF Toolbox starts.
10. Check that [
] is selected in [Install], and then click [Next].
11. Restart your computer.
(1) Select the [Restart Computer Now (Recommended)] check box.
(2) Click [Restart].
* The CD-ROM may be removed once this screen appears.
12. Remove the cap (A) on the USB port of the machine.
Remove the cap by pulling out the string.
13. Connect the USB cable.
- Flat end (A): Connect to the USB port on the computer.
- Square end (B): Connect to the USB port on the machine.
NOTE
When a dialog box is displayed
- Follow the on-screen instructions and complete the installation.
Installing with [Custom Installation]
1. Insert the User Software CD-ROM.
2. Click [Custom Installation].
* The options to be displayed differ depending on your country or region.
NOTE
If the above dialog box does not appear
- If you cannot display the top screen when setting CD-ROM, perform the following operations.
* The CD-ROM drive name is indicated as "D:" in this manual. The CD-ROM drive name may differ depending on the computer you are using.
1. From the [Start] menu, select [Run].
2. Enter "D:\Minst.exe", and then click [OK].
1. Enter "D:\Minst.exe" in [Search programs and files] (or [Start Search]) under the [Start] menu.
2. Press the [ENTER] key on the keyboard.
If a language selection screen is displayed before the CD-ROM setup screen
- Select a language and then click [Next].
3. When the following screen appears, select the connection method to a computer.
Click [Next] in [Connect Printer Directly to Computer].
4. Select the check box for the software to be installed, and then click [Install].
* The options to be displayed differ depending on your country or region.
* To install the e-Manual, select the [Manuals] check box.
- If [Manuals] does not appear, install the e-Manual from the User Manual CD-ROM supplied with the machine.
5. Read the contents of the License Agreement, and then click [Yes].
7. Click [Exit].
Next, installation of MF Toolbox starts.
* In the following case, MF Toolbox is not installed. Proceed to Step 10.
- If you cleared the [MF Toolbox] check box in Step 4
8. Click [Next].
The screens for specifying a location in which the MF Toolbox is installed and position to which the start menu is added appear.
Specify the settings in the respective screens, and then click [Next]. Click [Start] in the displayed screen.
9. Click [Exit].
The software for which the check box was selected in Step 4 is installed.
Follow the on-screen instructions.
10. Check that [
] is selected in [Install], and then click [Next].
* The options to be displayed differ depending on your country or region.
11. Restart your computer.
(1) Select the [Restart Computer Now (Recommended)] check box.
(2) Click [Restart].
* The CD-ROM may be removed once this screen appears.
12. Remove the cap (A) on the USB port of the machine.
Remove the cap by pulling out the string.
13. Connect the USB cable.
- Flat end (A): Connect to the USB port on the computer.
- Square end (B): Connect to the USB port on the machine.
NOTE
When a dialog box is displayed
- Follow the on-screen instructions and complete the installation.
Checking the installation results
