• Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused.

    Setting ISO speed (PowerShot SX130 IS / SX150 IS)

    16-Sep-2011
    8200873500

    Solution

      Raise the [ISO speed] to use a fast shutter speed when you wish to reduce the effects of camera shake or avoid blurry subjects, or to turn the flash off when shooting in a dark area.
      CAUTION
      • The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program] ().
      • To set the [ISO Speed], it is necessary to set the [Shooting Mode] to one of the following modes.
      - [Manual] (), [Aperture Priority] (), [Shutter Speed Priority] (), [Program] ()


      1. Press the <Power> button on the camera.


      2. Press the <ISO / Jump> () button.


      3. The following screen appears on the LCD monitor.



      Press the <ISO / Jump> () button repeatedly to display the [ISO speed]* you want to set.
      The [ISO Speed] you selected is displayed on the screen.
      * The appropriate [ISO Speed] differs depending on shooting locations. If the camera shake warning icon () appears when you press the <Shutter Button> halfway, it is recommended to gradually raise the ISO speed in increments such as [ISO 80], [ISO 100], etc., and then set the [ISO Speed] when the camera shake warning icon () disappears.

      Guidelines when changing the ISO speed
      Automatically adjusts the ISO speed to the Shooting mode and shooting conditions.
        Fine weather conditions, outdoor shooting.
       Cloudy, twilight
      Nightscapes, dark interiors


      4. If the following icon is shown, the setting is complete (if setting [ISO Speed] to 400).


      NOTE
      • When the camera is set to [ISO AUTO] (), you can press the shutter button halfway to display the automatically set ISO speed.
      • In [Low Light] (), ISO speeds will automatically be set higher than in [AUTO] () mode, depending on the scene.
      CAUTION
      • Raising the [ISO Speed] increases the shutter speed and allows the flash to reach subjects at far distances. Therefore, it is possible to shoot images with less subject blur or camera shake even in dark places.
      • However, the higher the [ISO Speed], the more the noise stands out (more uneven areas in an image).
      • Lowering the ISO speed results in sharper images, but there may be an increased chance of image blurring in certain shooting conditions.