Shooting in Video Snapshot Mode
22-Jul-2010
8200744900
Solution
The Video Snapshot function enables you to shoot short scenes that last for 2, 4, and 8 seconds. You can play back Video Snapshot scenes along with your favorite music.
1. Set the mode switch to < M > or < 
>.
>.2. Turn on the camcorder.
Please be sure the camcorder is in movie mode.
- If the camcorder is in photo shooting mode, touch [
]in the lower-left corner of the screen. - If the camcorder is in photo viewing mode, touch [
], and then select [Original].
3. Touch [ 
].
].Only when performing the procedure in a recording mode.
4. Touch [ MENU ].
5. Touch [ 
].
].
6. 
Drag your finger up and down bring [ Video Snapshot Length ]into the orange selection bar, 
and touch inside the frame on the right.
Drag your finger up and down bring [ Video Snapshot Length ]into the orange selection bar, and touch inside the frame on the right.
7. Touch the length of video snapshot scenes.
8. Touch [ 
] to close the menu.
] to close the menu.1. Please be sure the camcorder is in recording movies mode.
2. Press < VIDEO SNAP >.
A blue border appears on the screen.
3. Press < START/STOP >.
- The camcorder records for about 4 seconds (the blue frame serves as a visual progress bar) and then automatically returns to record pause mode.
- When the camcorder stops recording, the screen will momentarily turn black as if a camera shutter had released.
- In the movie index screen, video snapshot scenes are indicated with the [
] mark.
NOTE
Changing the camcorder's operating mode will deactivate the video snapshot mode.