• Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused.

    2-Sided Copying

    06-Sep-2011
    8200335800

    Solution


    The 2-Sided Copying mode enables you to make two-sided copies from one-sided or two-sided documents, or make one-sided copies from two-sided documents. This feature is useful especially when copying in large quantities because paper costs can be reduced by half.
    The default setting is <OFF>.

    NOTE
    • 2 to 2-Sided and 2 to 1-Sided copying are available only for the MF4380dn.
    • Paper used to make 2-sided copies must conform to the following specifications:
    - Paper size: A4 and LTR (envelopes cannot be used for 2-sided copying)
    - Paper weight: 64 to 80 g/sq.m.

    1 to 2-Sided Copying




    1. Place documents.

    2. Press [COPY].

    3. Press [2-Sided] to select <1 > 2-SIDED>, then press [OK].

    NOTE
    If there are odd number of documents when the 1-Sided to 2-Sided mode is used, the back side of the last copy is left blank.

    4. Press [ ] or [ ] to select <BOOK TYPE> or <CALENDAR TYPE>, then press [OK].

    • <BOOK TYPE>: The front and back sides of the copy will have the same top-bottom orientation.
    • <CALENDAR TYPE>: The front and back sides of the copy will have the opposite top-bottom orientation.

    NOTE
    For the landscape oriented documents:
    • When <BOOK TYPE> is selected, the front and back sides of the copy will have the opposite top-bottom orientation.
    • When <CALENDAR TYPE> is selected, the front and back sides of the copy will have the same top-bottom orientation.

    5. Use - [numeric keys] to enter the desired copy quantity (1 to 99).

    6. Press [Start].

    If you want to copy multiple documents using the platen glass, place a document and press [Start] once for each page. When scanning is complete, press [OK].

    NOTE
    • To cancel all settings, press [Stop/Reset].
    • When you switch the mode by pressing the mode keys such as [FAX], all settings will be canceled. If you want to keep the settings, store the settings as follows: [Menu] -> <COPY SETTINGS> -> <STANDARD SETTINGS> -> <2-SIDED>
    • You can skip step 4. In this case, the machine scans 1-sided documents to make 2-sided, <BOOK TYPE> copies.

    2 to 2-Sided Copying (MF4380dn Only)




    1. Place documents in the ADF.

    2. Press [COPY].

    3. Press [2-Sided] repeatedly to select <2 > 2-SIDED>, then press [OK].

    4. Press [ ] or [ ] to select <BOOK TYPE> or <CALENDAR TYPE> for the document layout, then press [OK].

    • <BOOK TYPE>: The front and back sides of the document will have the same top-bottom orientation.
    • <CALENDAR TYPE>: The front and back sides of the document will have the opposite top-bottom orientation.

    5. Press [ ] or [ ] to select <BOOK TYPE> or <CALENDAR TYPE> for the output layout, then press [OK].

    • <BOOK TYPE>: The front and back sides of the copy will have the same top-bottom orientation.
    • <CALENDAR TYPE>: The front and back sides of the copy will have the opposite top-bottom orientation.

    6. Use - [numeric keys] to enter the desired copy quantity (1 to 99).

    7. Press [Start].

    NOTE
    • To cancel all settings, press [Stop/Reset].
    • When you switch the mode by pressing the mode keys such as [FAX], all settings will be also canceled. If you want to keep the settings, store the settings as follows: [Menu] -> <COPY SETTINGS> -> <STANDARD SETTINGS> -> <2-SIDED>
    • You can skip steps 4 and 5. In this case, the machine scans 2-sided documents in the <BOOK TYPE> orientation and outputs the same way.
    • If you press [Start] in step 4 after selected <CALENDAR TYPE>, the machine scans 2-sided documents in the <CALENDAR TYPE> orientation and outputs the same way.

    2 to 1-Sided Copying (MF4380dn Only)




    1. Place documents in the ADF.

    2. Press [COPY].

    3. Press [2-Sided] repeatedly to select <2 > 1-SIDED>, then press [OK].

    4. Press [ ] or [ ] to select <BOOK TYPE> or <CALENDAR TYPE>, then press [OK].

    • <BOOK TYPE>: The front and back sides of the document have the same top-bottom orientation.
    • <CALENDAR TYPE>: The front and back sides of the document will have the opposite top-bottom orientation.

    5. Use - [numeric keys] to enter the desired copy quantity (1 to 99).

    6. Press [Start].

    NOTE
    • To cancel all settings, press [Stop/Reset].
    • When you switch the mode by pressing the mode keys such as [FAX], all settings will be also canceled. If you want to keep the settings, store the settings as follows: [Menu] -> <COPY SETTINGS> -> <STANDARD SETTINGS> -> <2-SIDED>
    • You can skip step 4. In this case, the machine scans 2-sided documents in the <BOOK TYPE> orientation to make 1-sided copies.