Settings before Using the Scan to File Server Function (SMB)

    16-Dec-2011
    8200290600

    Solution


    Before using the Scan to File Server function (SMB), the following settings are required:

    • Network settings
    Connect the computer and the machine and set the IP address to communicate through a network.

    • Setting the computer (as a file server)
    Set the computer corresponding to your system environment.

    • Setting the machine
    Set the machine to be able to send documents to the file server.

    Network settings

    1. Connect the LAN Cable.




    2. Set the IP Address.

    For instructions on how to set the IP address, see "Setting the IP Address."

    Setting the computer as a file server

    Setup the computer as a file server.

    File server settings vary depending on your system environment.
    For instructions on how to setup the computer, see the following:

    Setting the machine

    After the file server is set up, set the machine to be able to send documents to the file server.


    Was this helpful?

    YES. It solved my issue

    It covered my problem, but the solution still didn't work for me

    The information on the page is hard to understand

    It has nothing to do with my issue