Printing on DVD/CDs
04-Aug-2008
8200219600
Solution
The CD-R Tray (supplied) allows the printing of images on printable DVD/CDs.
REFERENCE
- We recommend that you test print on an unneeded printable DVD/CD first.
Printing on DVD/CDs
Choose either of the method below according to your purpose.
- To print from DVD/CD label
You can print the label side of the DVD/CD on a printable DVD/CD by loading it on the Platen Glass.
- To print a DVD/CD label from photo data on a memory card
You can print photo data on a memory card on a printable DVD/CD by loading the memory card on the Card Slot
- To print a DVD/CD label from a printed photo
You can print a printed photo on a printable DVD/CD by loading it on the Platen Glass.
- To print a DVD/CD label by using the supplied application
CD-LabelPrint is bundled application software that allows you to edit and modify data before printing. Install it on your computer to use it.
Copy the label of an existing DVD/CD and print it on a printable DVD/CD.
IMPORTANT
- You cannot print on 8 cm DVD/CDs.
REFERENCE
- If printing is misaligned, adjust the printing position. For information on how to adjust it, see Adjusting the Print Area.
1.Make sure that the machine is turned on.
2.Select 
DVD/CD label print on the HOME screen, then press the OK button
DVD/CD label print on the HOME screen, then press the OK button3.Select 
From DVD/CD label, then press the OK button.
From DVD/CD label, then press the OK button.The print area setting screen is displayed.
4.Use the 
or 
button to select Outer circle or Inner circle and use the 
or 
button to change the print area.
or button to select Outer circle or Inner circle and use the or button to change the print area.5.Press the OK button.
REFERENCE
- Measure the outer and inner diameters of the printing surface of the printable DVD/CD and make sure you set a value smaller than the measured value for the outer diameter, and a value larger than the measured value for the inner diameter.
- For information on printable discs, contact their manufacturers.
6.Use the or button to select Recommended DVD/CD or Other DVD/CD, then press the OK button.
or button to select Recommended DVD/CD or Other DVD/CD, then press the OK button.REFERENCE
- If your medium is the recommended DVD or CD, specify Recommended DVD/CD for the suitable density printing. If not, specify Other DVD/CD.
7.Load the copy source DVD/CD on the Platen Glass, then press the OK button.
IMPORTANT
- Be sure to load the copy source DVD/CD with its label side down on the center of the Platen Glass. If you load it near the edge of the Platen Glass, part of the image may be cut off.
8.Check the print settings, then press the OK button.
The message for preparation is displayed.
REFERENCE
- Press the Black button for black & white copying.
- To change print settings, press the Back button repeatedly until the screen for the setting item to change appears, then change the setting.
IMPORTANT
- Do not see the light source directly while copying is in progress.
9.Set the printable DVD/CD.
Press the left Function button to see how to set the printable DVD/CD.
10.Press the Color button.
REFERENCE
- If you press the Black button in step 8, black & white copying will start even if you press the Color button.
- To cancel copying, press the Stop button.
- After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink has dried.
Print an image on a memory card onto a printable DVD/CD.
IMPORTANT
- You cannot print on 8 cm DVD/CDs.
REFERENCE
- If printing is misaligned, adjust the printing position. For information on how to adjust it, see Adjusting the Print Area.
1.Make sure that the machine is turned on.
2.Select 
DVD/CD label print on the HOME screen, then press the OK button.
DVD/CD label print on the HOME screen, then press the OK button.3.Select 
From photo data, then press the OK button.
From photo data, then press the OK button.4. Confirm the message, then insert the memory card into the Card Slot.
The print area setting screen is displayed.
5. or button to select Outer circle or Inner circle and use the or button to change the print area.
or button to select Outer circle or Inner circle and use the or button to change the print area.6.Press the OK button.
REFERENCE
- Measure the outer and inner diameters of the printing surface of the printable DVD/CD and make sure you set a value smaller than the measured value for the outer diameter, and a value larger than the measured value for the inner diameter.
- For information on printable discs, contact their manufacturers.
7.Use the or button to select Recommended DVD/CD or Other DVD/CD, then press the OK button.
or button to select Recommended DVD/CD or Other DVD/CD, then press the OK button.REFERENCE
- If your medium is the recommended DVD or CD, specify Recommended DVD/CD for the suitable density printing. If not, specify Other DVD/CD.
8.Use the or button to select the photo to print, then press the OK button.
or button to select the photo to print, then press the OK button.9.Confirm the print image on the DVD/CD, then press the OK button.
10.Check the print settings, then press the OK button.
The message for preparation is displayed.
REFERENCE
- To change print settings, press the Back button repeatedly until the screen for the setting item to change appears, then change the setting.
11.Set the printable DVD/CD.
Press the left Function button to see how to set the printable DVD/CD.
12.Press the Color button.
REFERENCE
- Printing will not start if you press the Black button.
- To cancel copying, press the Stop button.
- After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink has dried.
Print an image on a printed photo onto a printable DVD/CD.
IMPORTANT
- You cannot print on 8 cm DVD/CDs.
REFERENCE
- If printing is misaligned, adjust the printing position. For information on how to adjust it, see Adjusting the Print Area.
1.Make sure that the machine is turned on.
2.Select 
DVD/CD label print on the HOME screen, then press the OK button.
DVD/CD label print on the HOME screen, then press the OK button.3.Select 
From printed photo, then press the OK button.
From printed photo, then press the OK button.The print area setting screen is displayed.
4.Use the or button to select Outer circle or Inner circle and use the or button to change the print area.
or button to select Outer circle or Inner circle and use the or button to change the print area.5.Press the OK button.
REFERENCE
- Measure the outer and inner diameters of the printing surface of the printable DVD/CD and make sure you set a value smaller than the measured value for the outer diameter, and a value larger than the measured value for the inner diameter.
- For information on printable discs, contact their manufacturers.
6.Use the or button to select Recommended DVD/CD or Other DVD/CD, then press the OK button.
or button to select Recommended DVD/CD or Other DVD/CD, then press the OK button.REFERENCE
- If your medium is the recommended DVD or CD, specify Recommended DVD/CD for the suitable density printing. If not, specify Other DVD/CD.
7.Load the photos on the Platen Glass.
Press the OK button to scan the photos.
CAUTION
- Do not see the light source directly while scanning is in progress.
8.Use the or button to select the photo to print, then press the OK button.
or button to select the photo to print, then press the OK button.REFERENCE
- If
appears on the preview screen, the photos may be not scanned properly. Press the Back button, then repeat the procedure from step 7.
9.Confirm the print image on the DVD/CD, then press the OK button.
10.Check the print settings, then press the OK button.
The message for preparation is displayed.
REFERENCE
- Press the Black button for black & white copying.
- To change print settings, press the Back button repeatedly until the screen for the setting item to change appears, then change the setting.
11.Set the printable DVD/CD.
Press the left Function button to see how to set the printable DVD/CD.
12.Press the Color button.
REFERENCE
- If you press the Black button in step 10, black & white copying will start even if you press the Color button.
- To cancel copying, press the Stop button.
- After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink has dried.
- CD-LabelPrint is bundled application software that allows you to edit and modify data before printing. Install it on your computer to use it. For information on how to install this software, refer to your setup manual.
- For details on how to print with CD-LabelPrint, refer to its manual. If you are using Windows, click Start > All Programs (or Programs in Windows 2000) > CD-LabelPrint > Help. If you are using a Macintosh, open Application folder in the location where the MP Drivers were installed > CD-LabelPrint folder > Manual folder > double-click Manual.htm.
