Ethernet Driver
Solution
You can specify the communication speed and Ethernet connection speed. The default setting is <AUTO>.
If the System Password has been set, enter the System Password using the numeric keys, then press [OK].
- <AUTO>: Automatically determines the communication speed (Half duplex/Full duplex) and Ethernet type (10Base-T/100BaseTX). Skip to step 11.
- <MANUAL>: You have to manually specify the communication mode and Ethernet type.
NOTE
If you reconnect the network cable (for example, reconnect the cable to a different Ethernet hub) with the power on, the Auto Detect function will not work even if you set <AUTO DETECT> to <AUTO>. (Connect the cable with the power off.)
7. If you have selected <MANUAL> in step 6, press [<-] or [+>] to select <COMMUNICATION MODE>, then press [OK].
- <FULL DUPLEX>: Sends and receives simultaneously.
- <HALF DUPLEX>: Sends and receives alternately.
- <100 BASE-TX>: Establishes a 100Base-TX network connection.
- <10 BASE-T>: Establishes a 10Base-T network connection.