28-May-2024
0400961902
I have read and understood the disclaimer below
and wish to download the designated software
Firmware Version 1.3.0 incorporates the following enhancements and fixes:
1. Adds [FEM] to [Flash C.Fn settings]. Also, adds [ON/ETTL→M] to [Customize buttons]. Enables the ability to set Flash exposure memory (FE memory) from the camera when using Speedlites without an LCD panel.
2. The following issues have been fixed.
2-1. Fixes an issue that may cause the camera, in rare instances, to experience a delayed restart after the camera has gone into Auto Power Off.
2-2. Fixes an issue that, under specific circumstances and in rare instances, may prevent the image from being displayed in the viewfinder or on the screen causing the camera to stop operating, or Error Code 70 may be displayed.
2-3. Fixes an issue that may result in Error Code 70 being displayed when the user is shooting in A+ Mode or with the camera set to AI Focus AF.
2-4. Fixes an issue that may cause the card access lamp to start flashing and the camera to not operate normally when shooting small subjects.
2-5. Fixes an issue that may cause the camera to continue shooting when the user presses the shutter button and another button at the same time.
If the camera's firmware is already Version 1.3.0, it is not necessary to update the firmware.
Notes:
Users manual in the WEB is updated accordingly. Please download the manual as well as the latest firmware. You can download it from the official WEB site.
Preparations for a firmware update:
After the downloaded compressed file (.zip) is extracted, a firmware folder is created.
*Extracting the downloaded file:
Right-click the zip file, and then select Extract All to extract the file.
In the folder you downloaded are the firmware (EOSR8130.FIR / file size: 73,025,792 bytes) and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish, and Simplified Chinese). Before starting the firmware update operations, please be sure to carefully review the instructions to confirm your understanding of the firmware update procedures.
(The following is the history of past firmware updates.)
Changes in version 1.2.0:
1. Adds support for RF-S10-18mm F4.5-6.3 IS STM lens.
2. Fixes minor issues.
Changes in version 1.1.0:
1. Adds support for the Software Development Assistance Kit (EDSDK/CCAPI).
2. Fixes minor issues.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Singapore Pte. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.