Printer Firmware Updater (Windows) for the G3000 series Ver.1.1

    15-Jun-2017
    0400294401

    Download

    I have read and understood the disclaimer below
    and wish to download the designated software

    OS

    • Windows 10 (x64)
    • Windows 10
    • Windows 8.1 (x64)
    • Windows 8.1
    • Windows 8 (x64)
    • Windows 8
    • Windows 7 (x64)
    • Windows 7
    • Windows Vista (x64)
    • Windows Vista

    Outline

    This updater will upgrade your printer's firmware to version 3.050.
    To perform this upgrade, a USB cable and a computer are needed.
    If your printer's firmware version is already 3.050 or later, the update is not necessary.
    To check your printer's firmware version, refer to the Update Procedure included in the downloaded file.

    Detail

    - Printer Update.exe: The firmware to upgrade the functions of the printer.
    - HowTo folder: Contains the manual of the firmware update procedures. Launch it from fut_upgrade.html inside the language folder.

    Update History

    [Ver.1.1]
    Maintenance function was optimized.
    [Ver.1.0]
    - The following paper sizes are added.
    (B5, A5, L, 2L, Square(5"x5"), 8"x10", Hagaki, Card)
    - Internal specification has been changed.

    System requirements

    Windows 10 (32bit)
    Windows 10 (64bit)
    Windows 8.1(32bit)
    Windows 8.1(64bit)
    Windows 8(32bit)
    Windows 8(64bit)
    Windows 7 SP1 or later(32bit)
    Windows 7 SP1 or later(64bit)
    Windows Vista SP2 or later(32bit)
    Windows Vista SP2 or later(64bit)

    Caution

    - A USB cable & a computer are needed to perform this upgrade.
    - See the attached manual to confirm the update procedures.
    - Execute updating in the environment which you log onto as a member of the Administrators group.

    Setup instruction

    Double-click the downloaded exe. file to decompress it. Then, open the newly-created "fuu_-win-g3000-1_1-ea7" folder. And open the languageā€™s folder inside "HowTo" folder, then execute the update of the firmware based on the manual "fut_upgrade.html".

    File information

    1. File name : fuu_-win-g3000-1_1-ea7.exe
    2. File version : 1.1
    3. File size : 18256KB

    Disclaimer

    All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.  

    Canon Singapore Pte. Ltd. and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.   

    Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).

    You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat or create derivative works from the Content, in whole or in part.  

    You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.

    By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.

    Was this helpful?

    YES. It solved my issue

    It covered my problem, but the solution still didn't work for me

    The information on the page is hard to understand

    It has nothing to do with my issue