RC-IP1000 PTZ Camera Controller

General

Power

12V DC, PoE+ (with some restrictions*1)

Dimensions

342 mm (W) x 140 mm (H) x 245 mm (D)
13.47 inch (W) x 5.71 inch (H) x 9.65 inch (D)
(excluding controller level, protruding parts)

Weight

Approx. 3.5 kg

Operating Temperature

0°C ~ 40°C

Camera Control

Controller Supported Cameras

CR-N700, CR-N500, CR-N300, CR-N100, CR-X500, CR-X300, C500 Mark II (requires firmware v1.0.3.1 or later), C300 Mark III (requires firmware v1.0.1.1 or later), XF605 (requires firmware v1.0.1.1 or later), EOS C70 (requires firmware v1.0.5.1 or later)

Number of Connectable Cameras

200 (IP), 5 (Serial)

Number of Camera Select Buttons

10

Number of Camera Groups

20 (10 cameras in 1 group)

Video Interfaces

12G-SDI IN/OUT, HDMI OUT, IP IN

Supported Protocols

XC protocol (IP)
NU protocol (serial)

Preset (Store/Play/Delete)

Up to 100 for each camera

Trace (Store/Play/Delete)

Up to 10 for each camera

Other Controls

Control lever, zoom rocker, focus dial
User buttons x 10, dials x 14, up down left right select buttons

Supported Add-On Applications

Auto Tracking Application
Auto Loop Application

Screen

LCD Display

7-inch touch panel, 800 x 480 resolution

Camera Video Preview

YES (SDI IN / IP), up to 9 cameras per page

Touch Focus

YES (SDI IN / IP)

Crop Frame Control

YES (SDI IN / IP, CR-N700 only)

Terminal

GPIO D-Sub 25 pin x 2 ports

For GPIO external control/link

LAN / PoE+ RJ45 port

IP camera control, IP video input, PoE+ power supply

Serial RJ45 port x 5

Serial camera control

12G-SDI IN

SDI video input

12G-SDI OUT

Video Output

HDMI OUT (Type A) x1

Video Output

12V DC 4-Pin XLR port

DC Power

USB Type A x2

Save Settings, Firmware Update

Others

Initial camera settings without PC

YES

Simultaneous multi-camera setup

YES


  1. When using PoE+, user must choose either full controller brightness or rear USB port functionality. See manual for details.