Solution
When you see the warning "Overheated! Shutting down." try these steps in the order below.
1.Check the [Date/Time/Zone] is set.
Set the current date, time, and zone correctly if the [Date/Time/Zone] screen is displayed when you turn the camera on.
When the setting is completed, please proceed to step 2.
IMPORTANT
- The date/time/zone setting is required for proper camera temperature control.
- When [Date/Time/Zone] is set, the temperature warning is displayed properly.
2. When the [Date/Time/Zone] is already set, turn your camera off and wait for at least 6 minutes.
Turn off the camera and wait for at least 25 minutes in order to shoot 4K movie up to 9 minutes 59 seconds and High frame rate movie up to 7 minutes 29 seconds.
(Depending on the shooting environment and operating conditions, the actual shooting time may be shorter than the times specified above).