How do I turn off the setting that automatically deactivates the LCD screen?
26-Jul-2013
8201895500
Solution
The setting that automatically deactivates the screen cannot be turned off.
However, you can adjust the timing of the setting (Display Off) so that the screen stays on for up to 3 minutes.
Use the following procedure to change the settings for [Display Off].
1. Turn the camera on.
2. Press the <MENU> button to display the menu.
3. Choose [Power Saving] on the [ 
] tab.
] tab.
4. Select [Display Off] and press the <
><
> buttons to adjust the time until the screen deactivates.
><> buttons to adjust the time until the screen deactivates.
IMPORTANT
To conserve battery power, you should normally choose [On] for [Auto Power Down] and [1 min.] or less for [Display Off].
NOTE
- The [Display Off] setting is applied even if you set [Auto Power Down] to [Off].
- These power-saving functions are not available when you have set Eco mode to [On].
This completes the steps for changing the [Display Off] settings.