Correcting Image Distortions and Color Blur (Lens Aberration Correction Function of Digital Photo Professional Ver.3.10)
14-Feb-2011
8201039400
Solution
Some lens characteristics could cause the periphery of images shot to become darker than the center, or cause the subject to be distorted. In such cases, you can use the lens aberration correction function of Digital Photo Professional. Using this function, you can improve the following phenomena, which cannot be completely eliminated in the lens structure, to make images that are closer to what you intended.
Phenomena that can be corrected:
- Diminished peripheral illumination (the amount of light at the periphery of an image)
- Distortions (distorted lines)
- Chromatic aberration (color fringing that occurs in the periphery of an image)
- Color blur (blue or red color blur that sometimes occurs at the edge of the highlighted area of an image)
NOTE
- You can also correct RAW images taken with the compatible lens even when the extender is attached.
- The aberration correction function is not available for images shot with combinations of camera/lens other than those given under "Compatible Cameras" and "Compatible Lenses". They are therefore not displayed and cannot be used.
About "Compatible Cameras" and "Compatible Lenses", please refer to Compatible Cameras and Lenses for the Function of Correcting Lens Aberration with Digital Photo Professional 3.10.
Follow the procedure below to correct lens aberration.
1. Start Digital Photo Professional and display the main window.
2. In the main window displayed, if you double-click the RAW image to be corrected, the edit screen and tool palette appear.
REFERENCE
Select [View] menu and [Tool Pallete] when the tool palette does not display.
3. Select the [NR/Lens/ALO] tab and click [Tune].
4. When the [Lens aberration correction] window appears, select the items to be corrected. This section describes how to correct [Peripheral Illumination] and [Distortion].
5. The image is corrected and redisplayed.
To adjust the correction amount, drag the slider from side to side.
REFERENCE
You can correct red chromatic aberration with the [R] slider of the [Chromatic aberration] or blue chromatic aberration with the [B] slider.
When the corrections are complete, click [OK].
6. When closing the [Lens aberration correction] window, the result of the corrections is reflected in the image in the edit window, and the image is redisplayed.
In the main window, the [ 
] mark is displayed on the image to indicate the lens aberration corrections.
] mark is displayed on the image to indicate the lens aberration corrections.
Thumbnail Image Displayed in the Main Window
NOTE
About Shooting Distance Information Slider
When correcting RAW images shot with EOS-1D Mark IV, EOS-1Ds Mark III, EOS-1D Mark III, EOS 5D Mark II, EOS 7D, EOS 60D, EOS 50D, EOS 40D, EOS REBEL T3i/EOS 600D, EOS REBEL T2i/EOS 550D, EOS REBEL T1i/EOS 500D, EOS DIGITAL REBEL XSi/EOS 450D, EOS REBEL T3/EOS 1100D, or EOS DIGITAL REBEL XS/EOS 1000D,if shooting distance information has been saved to the image, the slider is set automatically according to this shooting distance information. However, if no shooting distance information is saved to the image, the slider is set automatically to the right end at infinity position. If the image's shooting distance is not infinite, you can minutely adjust the distance by operating the slider while looking at the screen.
When correcting RAW images shot with EOS-1D Mark II N, EOS-1Ds Mark II, EOS-1D Mark II, EOS-1Ds, EOS-1D, EOS 5D, EOS 30D or EOS DIGITAL REBEL XTi/EOS 400D DIGITAL, it is set automatically to the right end at infinity position. You can then minutely adjust the distance by operating the slider while looking at the screen if the shooting distance is not infinite.
[Shooting distance information] slider is applied to all the correction items with check marks.
This completes the process of correcting lens aberration.