• Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused.

    Image edges are blurred or white banding occurs (iPF815/iPF825)

    18-Oct-2010
    8200968000

    Issue

    Image edges are blurred or white banding occurs

    Cause and Solution

    <Cause1> The Platen suction is too strong.
    <Corrective Action1>
    Set VacuumStrngth to Weakest.
    <Corrective Action2>
    Close the blue Switch on the platen so that it matches the paper size.

    <Cause2> The Printhead is set too high.
    <Corrective Action>
    Lower the Printhead.

    <Cause3> The type of paper specified in the printer driver does not match the type loaded in the printer.
    <Corrective Action1>
    Load paper of the same type as you have specified in the printer driver.
    <Corrective Action2>
    Make sure the same type of paper is specified in the printer driver as you have loaded in the printer.
    1.Hold down the Stop button for a second or more to cancel printing.
    2.Change the type of paper in the printer driver and try printing again.