27-Nov-2020
0400611402
I have read and understood the disclaimer below
and wish to download the designated software
Firmware Version 1.2.4 incorporates the following fixes:
1. Minor bug fixes.
When updating to this firmware, please use the firmware files listed below, as well as the latest Camera Management Tool.
The latest Camera Management Tool and its manual will need to be downloaded separately.
<Firmware file>
[1] vbr11v124.bin
[2] font-vbr11v120.bin
<Camera Management Tool>
- CCMTInstall.exe
The firmware contains software modules developed by third parties. The details are available in the download: Readme-E.txt. The Third-party Software License (ThirdPartySoftware-E.pdf) and the license conditions are available in the OpenSourceSoftware Folder which is inside the LICENSE folder.
Ver. 1.2.3
1. Fixed a bug that an image taken in the past could be sent instead of the still image being obtained.
2. Minor bug fixes.
Ver. 1.2.0
1. Improved Scream Detection capabilities.
2. Added support for selecting whether to use Audio Input or not, and which Audio Communication Method to use.
3. Added support for recording with any ONVIF profile.
4. Added support for using specified PresetToken when creating a new preset using ONVIF PTZ Service.
5. Changed to save the following items when initializing the camera while retaining the network settings;
Administrator Name, Password, Network Settings, NTP Server, HTTP Server, Host Access Restrictions, Time Zone, Certificates, Private Key, and IPsec.
6. Changed the setting items and values of "motion priority", one of Simple Camera Settings functions.
- [Exposure] "Auto (Shutter-priority AE)" => "Auto"
- [Shutter Speed] "1/1000" => [Shutter Speed Limit (Lower)] "1/1000"
[Shutter Speed Limit (Upper)] "1/16000"
7. Changed the factory default settings.
Previous settings will be maintained after updating the firmware.
- [IPv4 Address Settings Method] in the [IPv4]
Before update: "Manual" => After update: "Auto (DHCP)"
- [Set Name Server Address Automatically] in the [DNS]
Before update: "Disable" => After update: "Use DHCP/DHCPv6"
- [Guest User] in [User Authority]
Before update: [Camera Control] ON => After update: [Camera Control] OFF
[Video Distribution] ON => [Video Distribution] OFF
[Audio Distribution] ON => [Audio Distribution] OFF
- [Camera Name (Unicode characters)] in the [Camera Name]
Before update: "Camera" => After update: model name
- [Focus] in the [Camera Settings]
Before update: "Manual" => After update: "Auto"
- [Day/Night] in the [Camera Settings]
Before update: "Day Mode" => After update: "Auto"
- [Overwrite videos] in the [Memory Card Operations]
Before update: "Disable" => After update: "Enable"
8. Took measures against the problem that the infrared filter did not react in switching Day/Night.
9. Added support for Korean Language.
10. Added support for on-screen display of Korean language.
Ver. 1.1.8
1. The factory default settings have changed. Previous settings will be maintained, when updating the firmware.
- [User Name (Administrator ID)] / [Administrator Name]
After update: Not registered
- [Administrator Password]
After update: Not registered
Ver. 1.1.5
1. Added One-shot AF function on Camera Viewer and Mobile Camera Viewer.
2. Fixed bugs of viewer operation and others when using Windows Server 2008. (Ex. Security warning is displayed. / Unavailable to use H.264 or audio transmission.) If these problems can not be solved in this version, please download and install "Root certificate installer".
3. Fixed a bug that video could not be displayed on the viewer in some versions of Chrome.
4. Fixed a bug that an error occurred in downloading videos using Recorded Video Utility when Daylight Saving Time is set.
Ver. 1.1.2
1. Fixed a bug of time synchronization with NTP Server.
Ver. 1.1.0
1. The camera's support for the Windows 8/ Windows 8 Pro/ Windows 8 Enterprise 32/64 bit, has ended, due to Microsoft's ending support of these OSs.
2. Added support for Windows Server 2016.
3. Unified the Admin Viewer, VB Viewer, and Camera Viewer.
4. The Admin Viewer settings/ Admin Tools have been merged with the Setting Page.
5. The Recorded Video Utility in Admin Tools is now a separate software.
6. There is no longer a need to install the Admin Tools Certificate.
7. The following features have been added.
- Enhanced Digital Zoom
- Setting of Non-detection Area using Intelligent Function
- Simple Camera Settings
- Motion-Adaptive Noise Reduction
- ADSR (Area-specific Data Size Reduction ) during Bit Rate Control
- Setting of the Data Size Reduction Level in the ADSR function
- Mobile Camera Viewer
- Log Notifications
8. Added support for a rough setting of the detection area, when setting the Removed Object Detection.
9. Improved Scream Detection capabilities.
10. Added support for setting the maximum / minimum shutter speed when [Exposure] is set to [Auto], [Auto (Flickerless)] or [Auto (Aperture-priority AE)]
11. Added support for additional shutter speed of 1/50 sec.
12. Added support for changing of the Synchronization interval with the selected NTP server.
13. Added support for the viewing of the last successful sync time with the selected NTP server.
14. Added support for the viewing of camera angles set in the Preset, when setting the ADSR and Privacy Mask Setting Page.
15. Increased the maximum number of presets that can be set in a single tour, to 64 locations, in the Preset Tour.
16. Increased the maximum number of characters that can be used for the on-screen display, to 40.
17. Added a communications mode that only uses HTTPS, within [Encrypted Communications] selection.
18. Added support for SNMPv3.
19. Added support for TLS1.1/TLS1.2, and has suspended support for SSL3.0.
20. Added support for Group 5 and Group 14 in [DH Group] within [IPsec].
21. Limited the Viewer URI which could be used to publish video within a web pages which uses inline frames, to improve security.
22. Limited accessible directories that can be accessed via FTP, to improve security.
23. Removed support for NTP broadcast mode, to improve security.
24. Improved the connectability with some VMSs.
25. Added support for on-screen display of Japanese, French, Italian, German, Spanish, Russian, Turkish, and Polish languages.
26. Added support for Thai and Polish languages.
Ver. 1.0.9
1. Improved the sense of resolution, with reduced fringing and flaring.
There is a chance that under certain conditions, the amount of data will increase in comparison to before the update.
2. Improved the AF capability in low light.
3. Improved the AF capability when zooming.
4. Improved the connectability when using RTSP with some of the VMS.
5. Improved the connectability when using multicast transmission with some of the VMS.
6. Fixed a bug that would not allow the Recorded Video Utility to download certain recorded video files.
7. Corrected an issue where the recordings were truncated, when used with specific VMSs.
Ver. 1.0.3
1. Shorten the time it takes to view the Video List from the Recorded Video Utility.
2. Changed the listing order of the default Media Profile to increase the connectability with ONVIF.
Windows 8.1/Windows 8.1 Pro/Windows 8.1 Enterprise 32/64-bit
Windows 10 Pro/Windows 10 Enterprise/Windows 10 Education/Windows 10 Home 32/64-bit
Windows Server 2012 Standard 64-bit
Windows Server 2012 R2 Standard 64-bit
Windows Server 2016 Standard 64-bit
- Be sure to change the administrator password from the factory default settings.
- After completing the firmware update, the Camera Management Tool Ver.1.x cannot be used.
- When restoring factory default settings after updating the firmware, it is required to set [User name (Administrator ID)], [Administrator Name], and [Administrator Password]. Also set the camera registered information to the recorder, etc.
- Updating the firmware from the version earlier than Ver.1.1.5 may cause a bug on the display of Camera Viewer and Settings Page, due to Web browser cache. Please delete the cache of Web browser you are using.
- When updating the firmware from versions older than Ver. 1.1.0, the following limitations will apply:
1) While the top page will be no longer exist, the Setting Page or the Camera Viewer will be shown. You will also not be able to use a customized top page as before.
2) You will not be able to broadcast the video using the viewer's URI, when creating a web page with an inline frame.
3) The directories accessible via FTP will be limited."
- After completing the firmware upgrade, you will not be able to use the Proxy Authentication Admin Tools included on the CD-ROM.
- After completing the firmware upgrade, the camera's time settings may have changed. Reset the time on the settings page and reboot the camera.
1. Download the file to any folder.
2. Right-click the zip file, and then select Extract All to extract the file.
3. For further instructions, refer to Readme in the decompressed folder.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Singapore Pte. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.