18-Nov-2020
0400535901
I have read and understood the disclaimer below
and wish to download the designated software
This firmware updater will upgrade your printer's firmware to version 2.100. A USB cable & a computer are needed to perform this upgrade.
When the firmware version is already 2.100 or later, updating the firmware is not necessary.
The pre-existing software such as printer driver or application software will not function anymore if the firmware is upgraded from Ver. 1.***.
Download the latest software from the download library and install them.
- Printer Update: The software for updating the functions of the printer.
- language’s folder: Includes the manual for firm update procedures. Launch it from Manual.html inside the language’s folder.
[Ver.1.3]
- macOS Catalina (10.15) has been added as a supported OS.
- macOS Big Sur (11.0) has been added as a supported OS.
[Ver.1.2a]
- macOS Mojave (10.14) has been added as a supported OS.
- macOS High Sierra (10.13) has been added as a supported OS.
- macOS Sierra (v10.12) has been added as a supported OS.
[Ver.1.2]
1.OS X El Capitan (v10.11) has been added as a supported OS.
2.OS X Yosemite (v10.10) has been added as a supported OS.
3.[ROM]
- The supported paper for PictBridge printing is changed to Photo paper Pro Platinum N.
[Manual]
- The firmware upgrade procedures are revised.
[Ver.1.0]
1.OS X Mavericks v10.9 has been added as a supported OS.
2.The following update has been made:
- Printing in color hue (in the PRO Mode) that look like the one on the monitor can be performed.
- The margin for Fine Art Papers has been reduced to 30 mm from 35 mm.
- Canvas paper has become supported.
Note) To enable the above update, the latest printer driver must be installed.
- The function for detecting the remaining ink level has been improved.
This will reduce the possibility of running out of ink before the message recommending replacement of ink tank.
macOS Big Sur 11.0
macOS Catalina 10.15
macOS Mojave 10.14
macOS High Sierra 10.13
macOS Sierra v10.12
OS X El Capitan v10.11
OS X Yosemite v10.10
OS X Mavericks v10.9
OS X Mountain Lion v10.8.5
OS X Lion v10.7.5
- The pre-existing software such as printer driver or application software will not function anymore if the firmware is upgraded from Ver. 1.***.
Download the latest software from the download library and install them.
- A USB cable & a computer are needed to perform this upgrade.
- Execute updating in the environment which you log onto as a member of the Administrators group.
- If the printer firmware does not need to be upgraded when the Printer Update Utility is started, "The printer cannot be found" message is displayed.
Double-click the downloaded dmg. file to decompress it. Then, open the newly-created "Printer Update" folder. And open the Manual.html inside the language’s folder, then execute the update of the firmware based on the manual "Manual.html."
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Singapore Pte. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.