• Our Customer Care Centre will be closed earlier at 12pm, on 24 December 2024. Usual operating hours will resume on 26 December 2024. We apologise for any inconvenience caused.

    imagePROGRAF TX-5300 Firmware Ver.1.44 (Need "Firmware Update Tool" to upgrade)

    09-Feb-2021
    0400445301

    Download

    I have read and understood the disclaimer below
    and wish to download the designated software

    OS

    • Windows Server 2019 (x64)
    • Windows Server 2016 (x64)
    • Windows Server 2012 R2 (x64)
    • Windows Server 2012 (x64)
    • Windows Server 2008 R2 (x64)
    • Windows 10 (x64)
    • Windows 10
    • Windows 8.1 (x64)
    • Windows 8.1
    • Windows 7 (x64)
    • Windows 7
    • macOS 11
    • macOS 10.15
    • macOS 10.14
    • macOS 10.13
    • macOS v10.12
    • OS X v10.11
    • OS X v10.10

    Outline

    Printer firmware for TX5300.

    Update History

    Modifications from Ver.1.43 to Ver.1.44
    1. Optimization of print operation.

    Modifications from Ver.1.40 to Ver.1.43
    1. Correction of failure that may not display "low ink level" alarm in Remote Monitoring Service System.

    Modifications from Ver.1.32 to Ver.1.40
    1. Modification of control in remote monitoring service system.
    2. Improvement of ink level detection.

    Modifications from Ver.1.21 to Ver.1.32
    1. Addition of new paper type
    "Plain Paper A" will be added.
    <Note>
    Upgrading printer driver to the following version or later is required to print from the printer driver with selecting Plain Paper A. Also updating media with MCT to update the paper information in the printer driver is required.
    Windows : Version 1.21
    Mac : CUPS 21.10.0.0

    Modifications from Ver.1.12 to Ver.1.21
    1. Support route certificate updating of remote monitoring service.
    2. Change of the remaining ink condition to indicate "no remaining ink" on the operation panel.
    3. Modify USB printing (direct printing) related failure.
    4. Support mirror image printing with HP-GL/2.
    5. Add pen table settings in HP-GL2.
    6. Optimization of operation control in ink supplying.

    Modifications from Ver.1.11 to Ver.1.12
    1. Failure correction of a function in monitoring service.

    Modifications from Ver.1.10 to Ver.1.11
    1. Correction related to enhancement of network security.
    2. Correction of authentication failure when IEEE802.1X is enabled.
    3. Correction of a failure in the remaining paper amount management system.
    4. Correction of a communication failure due to IEEE802.1X authentication packet.
    5. Correction of paper feed adjustment default value
    When paper feed unevenness is occurring, update the Media Information File to the latest
    version (Ver.02 or after) with Media Configuration Tool. Correct paper feed adjustment
    value will be adopted. When the value is not corrected, perform paper feed adjustment with
    the paper you are using.
    6. The initial setting value of color mode set from the main unit operation panel is changed
    from "perceptual" to "saturation."
    Device setting>Print setting>
    PDF print settings>Print quality settings>Color mode>Color (saturation)
    JPEG print settings> Print quality settings>Color mode>Color (saturation)
    HP-GL/2 print settings> Print quality settings>Color mode>Color (saturation)
    Print from USB flash settings> Print quality settings>Color mode>Color (saturation)
    Direct print settings from FTP>Print settings 1-4> Print quality settings>Color mode>
    Color (saturation)

    Modifications from Ver.1.03 to Ver.1.10
    1. Print speed is accelerated in some of the combinations of paper type and print mode.

    Modifications from Ver.1.02 to Ver.1.03
    1. Improve convenience of production

    File information

    1. File name : TX5300V0144.fdl
    2. File version : 1.44
    3. File size : 66481KB

    Disclaimer

    All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.

    Canon Singapore Pte. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.

    Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).

    You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.

    You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.

    By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.