20-Jun-2018
0400394803
I have read and understood the disclaimer below
and wish to download the designated software
Details of changes made to the firmware
This firmware (Version 1.2.1) includes the following added functions and performance improvements.
1. 4K video signals can now be reduced to 2K size for 4-picture or 2-picture display. In addition, a function has been added that reduces 8K video to 4K size and displays it to enable more efficient video checking.
2. A function has been added that automatically switches the picture quality settings in accordance with the video resolution (4K/2K) and the metadata (Colorimetry bit of the video payload ID, cinema camera type (CINEMA EOS SYSTEM/ARRI/Panasonic), and HDMI). This enables more practical and efficient operation in environments that use both HDR and SDR.
3. A function has been added that displays the brightness values*1 or RGB values of the input video of the specified pixel position. This enables to check the subject brightness in greater detail.
4. A function has been added that displays the peak and average brightness values*1 or the peak and average gradation values as well as the transition in these values for the entire input video picture (frame). This enables to visually check changes in brightness during video production.
5. A comparison display function has been added that enables HDR/SDR comparison display and CDL/User LUT ON/OFF comparison. This enables left-right picture quality comparison display with the press of a single button.
6. A function has been added that colors areas which are the specified range or more. This enables to visually check the brightness level during HDR shooting.
7. A function has been added to "False Color" that enables to arbitrarily adjust the boundary positions of the brightness coloring range.
8. A function has been added to "2020 Outside of Gamut View" that colors areas outside the native color gamut of the panel.
9. PLUGE and Color Bar test pattern images for HDR signals have been added to "Test Pattern".
10. A function has been added for remotely controlling the display using a Web browser*2. This enables to use a PC, tablet or other device to check and manipulate the displayed video and settings.
11. "2020 PQ to 2020 SDR", "2020 PQ to 709 SDR" and "2020 HLG to 709 HLG" have been added to "CDL/User LUT". This enables display of PQ signals converted to SDR characteristics and display with the PQ/HLG signal color gamut converted to BT.709.
12. The ARRI cinema camera LUTs "ARRI (Rec2100-PQ-1K-100)" and "ARRI (Rec2100-HLG-1K-200)" and the Panasonic cinema camera LUT "VARICAM (V-Log to V-709)" have been added to "User LUT".
13. "Preset Log 1", "Preset Log 2", "ARRI (Rec2100-PQ-1K-100)" and "ARRI (Rec2100-HLG-1K-200)" scale display have been added to "Wave Form Monitor".
14. A function has been added to "Wave Form Monitor" that colors areas outside the ranges set by "Color Range" and "HDR Range". This enables to easily check the areas outside these ranges.
15. A waveform monitor can now be displayed in both the left and right pictures during MultiView (Dual) display.
16. A brightness adjustment function has been added to "Wave Form Monitor".
17. The system gamma can now be adjusted between 1.000 and 1.500 when "Gamma/EOTF" is set to "Hybrid Log-Gamma.
18. The auto setting operation in "Color Range" has been changed to "Full" when "Gamma /EOTF" is set to "Preset Log 1" or "Preset Log 2".
19. "D65-Custom" has been added to "Color Temperature" to enable fine adjustment of the D65 color temperature.
20. Operation when "Color Range" is set to "Limited" has been enhanced so that over-white and under-black areas can be displayed.
21. Anamorphic display can now be zoomed as is.
22. "Gray" to the line display color setting and "Half" to the brightness setting have been added in the "Aspect Marker/Safety Zone Marker 1/Safety Zone Marker 2/Area Marker/Center Marker/Grid Marker" settings. This enables dark display during HDR display.
23. A display size setting has been added to "Center Marker /Audio Level Meter".
24. Horizontal display position adjustment, brightness adjustment, and VITC/LTC display ON/OFF settings have been added to "Time Code".
25. A save format setting has been added so that JPEG format capture is now possible in addition to the previous bitmap format.
26. HDR/SDR comparison display is now possible when "Peak Luminance Control" is set to "On".
27. Other UI and operation performance enhancements have also been made.
*1: Only when "Gamma /EOTF" is set to "SMPTE ST 2084 (PQ)/Hybrid Log-Gamma". (Not supported when "Gamma /EOTF" is set to "Hybrid Log-Gamma RGB".)
*2: A Wi-Fi adapter is required when using Wi-Fi.
Please check the firmware version on your display. If it is running Version 1.1 or earlier version, then it should be updated to Version 1.2.1. There is no action necessary if the display's firmware is Version 1.2.1.
Preparations for updating the firmware
It is recommended that current settings are exported before attempting to update the firmware. Once the firmware is updated, settings can be imported back to the display.
The downloaded folder contains the new firmware. (Filename: "update_dpv2421.rom", file size: 23,868,200 bytes) It also contains the firmware update procedure document (multilingual PDF file in following languages: Japanese, English, French, German and Chinese (simplified characters). Before proceeding to update the firmware, please read the firmware update procedure document.
Software Used in This Product
Software installed with this product includes software modules from Canon or third parties.
Software Developed by Canon and Free Software
Software developed or created by Canon and accompanying document is protected by copyright law, terms of an international convention and any other governing laws.
This product uses software modules under copyright by third parties and distributed as free software. Some of these software modules are subject to the GNU General Public License v2 (GPL), GNU Lesser General Public License v2.1 (LGPL) or any other license.
The following items are required to perform the firmware update:
1. Video Display unit
2. Personal computer
3. USB memory (FAT16 or FAT32)
4. Firmware (The downloaded file)
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Singapore Pte. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.