18-Aug-2015
0200216307
I have read and understood the disclaimer below
and wish to download the designated software
This software is a tool for printer administrators to easily build the same
printing environment on multiple computers.
Administrators can use this software to create an installer (Custom Installer)
based on the software and software settings that you want to have installed on
each computer.
On each computer, the software contained in the Custom Installer is installed
and settings such as driver media information and favorites are configured
simply by executing this Custom Installer.
Modifications from Ver.1.00 to Ver.1.10
1. Windows8.1/Windows Server 2012 R2 have been supported.
2. The supported models have been added.
The following hardware and software are recommended for this software.
Software:
Microsoft Windows 8.1 64-bit edition, English edition
Microsoft Windows 8 64-bit edition, English edition
Microsoft Windows 7 64-bit Version, English Edition
Microsoft Windows Vista 64-bit edition, English Edition
Microsoft Windows Server 2012 R2 64-bit edition, English edition
Microsoft Windows Server 2012 64-bit edition, English edition
Microsoft Windows Server 2008 R2 64-bit Version, English edition
Microsoft Windows Server 2008 64-bit Version, English Edition
Microsoft Windows Server 2003 R2 64-bit Version, English Edition
Microsoft Windows Server 2003 64-bit Version, English Edition
(Note)
- This software cannot be used on 32-bit versions of Windows.
If you are using a 32-bit version of Windows, use the 32-bit version of the Custom Installer Creation Tool.
- For the Windows OS, use the latest version of Service Pack.
Hardware:
Any computer running the software listed above
Recommended free space on hard disk: 200 MB or more
Applicable software:
imagePROGRAF Printer driver version 4.16 or later
imagePROGRAF Status Monitor version 25.20 or later
Printer Driver Optimization Module for AutoCAD version 1.10 or later
- You must be logged into Windows as an Administrator.
- When using this software, there is no need to set up after decompressing.
- After decompressing, click [CISetup.exe] and follow the instruction in the screen.
- Please refer to the help(Help\US\html\CICTHelp.html) after decompressing about how to use.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Singapore Pte. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.