Arizona 2280 GT

Machine Type Mid Volume UV flatbed printer
Printing method Piezoelectric inkjet
Number of nozzles 8-channel piezoelectric inkjet system with two 636-nozzle, variable droplet printhead per channel.
Ink configuration CMYK LcLm WW, or
CMYK LcLm WV, or
Image Technology Piezoelectric inkjet system with variable droplet printheads
Resolution Variable droplet sizes from 6 to 42 picolitres. The ability to vary the drop size to 6 picolitres produces sharp images with smoother gradients and quartertones. The ability to jet larger droplets up to 42 picolitres produces uniform colors. The result is near-photographic quality with sharpness only before seen at resolutions of 1,440dpi or higher. Text as small as 2pt. is perfectly legible (with High Definition mode).
Print Modes – Max M2/Hr  
Express 57.6
Production-Squared 44.0 - CM2 Configuration only
Production Fast 44.0 - LcLm Configuration only
Production-Smooth 36.7 - CM2 Configuration only
Production 36.7 – Except CM2 Configuration
Quality 26.0
Quality-layered (2 layers) 13.0
Ink System  
  • IJC255, IJC257 or IJC258 UV-curable inks
  • 3 litre bags for: Black, Cyan, Magenta, Yellow, Light Cyan, Light Magenta.
  • White and Varnish packed in 1 litre bags.
System Design  
True Flatbed True flatbed for rigid media printing with available Roll Media Option for flexible media printing
Rigid Media Maximum Area 125 x 250cm
Rigid Media Maximum Thickness 50.8mm
Rigid Media Print Area 126 x 251 cm (for edge-to-edge printing)
Rigid Media Maximum Weight Up to 34kg/m2
Roll Media Specifications 90 to 220cm, Up to 50kg (at any width), Maximum diameter: 240mm, Core: 3-inches (inside), Bias: Print-side-in or print-side-out, most types (application dependent)
Automatic Printhead Maintenance System The AMS (Automatic Printhead Maintenance System) enables quick, reliable and hands-free cleaning of a single colour in less than 25secs. or all colours in 2 to 4min. (depends on the printer version).
Pin Registration  
Number and Placement 5 pneumatic operated pins
Media size range for pin support 60 x 80cm (min) to 125 x 250cm (max)
Geometric Accuracy Flatbed  
Line Width ±0.8mm max error, measured over 2.5m
Line Length ±1.0mm max error, measured over 1.25m
Line Straightness / Width 0.7mm max error, measured over 2.5m
Line Straightness / Length 0.5mm max error, measured over 1.25m
Diagonal Error 1.0mm max error, measured over 2.5 x 1.25m
Geometric Accuracy Roll Media Option  
Line Width ±0.6mm max error, measured over 2.19m
Line Length ±1.5mm max error, measured over 2.0m
Line Straightness / Width 0.7mm max error, measured over 2.19m
Line Straightness / Length 2.0mm max error, measured over 2.0m
Diagonal Error 2.5mm max error, measured over 2.0 x 2.19m
Interface and Software  
Interface Type 10 / 100 / 1000 Base-T
Production Management Software ONYX Thrive (421 configurations or greater recommended)
Image Processing Software ONYX ProductionHouse (available, not recommended)
Operational Environment  
Electrical 2 X 200 - 240V AC, 50 / 60Hz, Single-phase, Rated Current: 16A, Circuit Breakers Europe: 16A
Compressed Air (Supplied by customer) Clean, dry, compressed air using a Coalescing Filter, Pressure Regulator set to 690 kPa (100psi) and 6mm outside diameter air tubing. Peak flow: 56l/min at 690kPa
Temperature 18°C to 30°C
Relative Humidity RH: 30 - 70% (non-condensing)
Room Ventilation 1,200m3 per hour minimum (See Site Preparation Guide)
Altitude 2,750m maximum, however some components specify a limit of 2,000m
Dimensions Printer only: 5.0 x 2.0m, 825kg
Printer + Roll Media Option: 5.0 x 2.3m, 1,000kg
Table height: 0.88m / Overall height: 1.3m